Modifing a motorcycle trailer to SIB trailer
-
neil h
- Veteran Member
- Posts: 556
- Joined: 03 Oct 2015, 20:34
- Boat Make: Bombard Aerotec 380
- Outboard: Toha 9.8 ss
Suzi 15 4/ ls
Yam 25 2/ ls - Location: North London/Essex boarders
- Has thanked: 4 times
- Been thanked: 37 times
Re: Modifing a motorcycle trailer to SIB trailer
For the draw bar, I suspect there will never be much nose weight with a sib, so don't expect lenghtening it to be an issue. I can always adjust the axle position to compensate somewhat. With such a light rig I don't think it will be easy to have anywhere near 50kg noseweight, but I may be wrong on that front... time will tell.
Assuming I don't decide to use them for this, i may have something better for you that those rollers. Although you may feel they are overkill for a launch trolley.
Prompt me nearer the time as they're stored elsewhere and i am highly likely to forget Paul.
Cheers
Neil
Assuming I don't decide to use them for this, i may have something better for you that those rollers. Although you may feel they are overkill for a launch trolley.
Prompt me nearer the time as they're stored elsewhere and i am highly likely to forget Paul.
Cheers
Neil
Last edited by neil h on 14 Feb 2016, 07:19, edited 1 time in total.
- mattswan2512
- Mega Poster, I Really Need To Get Out More !
- Posts: 1758
- Joined: 13 Jul 2015, 10:34
- Boat Make: F-Rib 330
- Outboard: Mercury 15hp ss 2 smoker.
- Location: Sunny southampton
- Has thanked: 95 times
- Been thanked: 118 times
Re: Modifing a motorcycle trailer to SIB trailer
Bloody good job well done Paul!!!!! I did ponder this a while back before buying my old trailer (Aaron b's now) but thought it too much work but looking at that mate it looks bloody brilliant!!! I'm okay with wood but have never really worked with metal and can't weld but it's mainly U bolts anyhow so will be my next path for a trailer for a sib etc.
Cracking thread cheers pal.
(Didn't know u had a sib too)
Cracking thread cheers pal.
(Didn't know u had a sib too)
Life is like a chocolate bar........
If you hold onto it for too long u get covered in sh☆t so......
live a life you will remember, not a life full of untested dreams.
If you hold onto it for too long u get covered in sh☆t so......
live a life you will remember, not a life full of untested dreams.
- mattswan2512
- Mega Poster, I Really Need To Get Out More !
- Posts: 1758
- Joined: 13 Jul 2015, 10:34
- Boat Make: F-Rib 330
- Outboard: Mercury 15hp ss 2 smoker.
- Location: Sunny southampton
- Has thanked: 95 times
- Been thanked: 118 times
Re: Modifing a motorcycle trailer to SIB trailer
I have got an individual small v hull roller you can have if ya need it Paul in my garageneil h wrote:Assuming I don't decide to use them for this, i may have something better for you that those rollers. Although you may feel they are overkill for a launch trolley.
Prompt me nearer the time as they're stored elsewhere and i am highly likely to forget Paul.
Cheers
Neil
Life is like a chocolate bar........
If you hold onto it for too long u get covered in sh☆t so......
live a life you will remember, not a life full of untested dreams.
If you hold onto it for too long u get covered in sh☆t so......
live a life you will remember, not a life full of untested dreams.
- Paul
- Mega Poster, I Really Need To Get Out More !
- Posts: 3056
- Joined: 30 Dec 2014, 21:46
- Boat Make: Mercury Ocean Runner 420
- Outboard: Mariner F40ELPT, 3.5 Tohatsu smoker
- MMSI Number: 235915479
- Location: Bracknell, Berkshire
- Has thanked: 459 times
- Been thanked: 356 times
Re: Modifing a motorcycle trailer to SIB trailer
Neil and Matt
Many thanks for the offers of the rollers.......I'll mention them again nearer the time
Paul
Many thanks for the offers of the rollers.......I'll mention them again nearer the time
Paul
-
neil h
- Veteran Member
- Posts: 556
- Joined: 03 Oct 2015, 20:34
- Boat Make: Bombard Aerotec 380
- Outboard: Toha 9.8 ss
Suzi 15 4/ ls
Yam 25 2/ ls - Location: North London/Essex boarders
- Has thanked: 4 times
- Been thanked: 37 times
Re: Modifing a motorcycle trailer to SIB trailer
might get a pic of them today. Don't think I am likely to use them, as I think the sib is better supported on bunks along length of tubes, and with the rollers that cam with the trailer supporting the transom itself.
-
neil h
- Veteran Member
- Posts: 556
- Joined: 03 Oct 2015, 20:34
- Boat Make: Bombard Aerotec 380
- Outboard: Toha 9.8 ss
Suzi 15 4/ ls
Yam 25 2/ ls - Location: North London/Essex boarders
- Has thanked: 4 times
- Been thanked: 37 times
Re: Modifing a motorcycle trailer to SIB trailer
No promises just yet but would these be any use? There are two of what you see in the pic
- Paul
- Mega Poster, I Really Need To Get Out More !
- Posts: 3056
- Joined: 30 Dec 2014, 21:46
- Boat Make: Mercury Ocean Runner 420
- Outboard: Mariner F40ELPT, 3.5 Tohatsu smoker
- MMSI Number: 235915479
- Location: Bracknell, Berkshire
- Has thanked: 459 times
- Been thanked: 356 times
Re: Modifing a motorcycle trailer to SIB trailer
Yes Neil they look ideal but only if you're sure you'll not be needing them yourself.
If you're still going to the Warsash event next weekend on the 20th I could collect them there.
Paul
If you're still going to the Warsash event next weekend on the 20th I could collect them there.
Paul
-
neil h
- Veteran Member
- Posts: 556
- Joined: 03 Oct 2015, 20:34
- Boat Make: Bombard Aerotec 380
- Outboard: Toha 9.8 ss
Suzi 15 4/ ls
Yam 25 2/ ls - Location: North London/Essex boarders
- Has thanked: 4 times
- Been thanked: 37 times
Re: Modifing a motorcycle trailer to SIB trailer
Gut feeling says they will not be suitable. Have partly blown the boat up on the trailer.
I think I'll be much happier to have the boat sat on bunks. Plan to try and have some time off Friday afternoon at least to have a play, so may well know if they are surplus to requirements by Saturday.
I think I'll be much happier to have the boat sat on bunks. Plan to try and have some time off Friday afternoon at least to have a play, so may well know if they are surplus to requirements by Saturday.



