Hi all, Andy from Scotland just joining

New to the forum?? Please pop in and say “Hi”
Introduce yourself and tell us about your boating interests/experiences or any other hobbies you may have.
Post Reply
Tequila Scotland
I'm New
Posts: 16
Joined: 15 Aug 2023, 20:53
Boat Make: Boatworld 3.2m Air Floor
Outboard: Yamaha F6C
MMSI Number: 235934708
Location: Inverness
Has thanked: 8 times
Been thanked: 2 times

Hi all, Andy from Scotland just joining

Post by Tequila » 18 Aug 2023, 21:38

Hi all, Andy here. Just to introduce myself. I've just started SIB boating again after a 47 year absence! My original SIB was a Campari round tail powered by a 1.5hp Forty Featherweight Seagull 2stoke outboard. I still have the outboard and it still starts first pull but I've upgraded to a 6hp Yamaha 4 stoke which pushes a 3.2m Boatworld Air floor nicely.
I'm based in the Highlands near Loch Ness and plan on boating our wonderful coast both East and West. First trip has been from the Big Sand camp site near Gairloch.
Thanks for accepting me in to the forum.
Attachments
IMG_20230817_121357_HDR.jpg
Trip around Rubha Ban west of Gairloch
Andy

User avatar
Martin England
Supporting Member
Posts: 5789
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorkshire
Has thanked: 1416 times
Been thanked: 782 times
Contact:

Re: Hi all, Andy from Scotland just joining

Post by Martin » 19 Aug 2023, 07:24

Hi Andy, welcome aboard. :wavey
How does it feel to be back in a sib after all these years?
Did you have any other crafts in between ?

Martin :welcome
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

Tequila Scotland
I'm New
Posts: 16
Joined: 15 Aug 2023, 20:53
Boat Make: Boatworld 3.2m Air Floor
Outboard: Yamaha F6C
MMSI Number: 235934708
Location: Inverness
Has thanked: 8 times
Been thanked: 2 times

Re: Hi all, Andy from Scotland just joining

Post by Tequila » 19 Aug 2023, 18:02

Hi Martin
Thanks for the welcome message.
It's great to have my own boat modest as it may be!
My only boating since owning the Campari as a teenager has been using clinker wooden boats for loch fishing and helping a friend with a 13m sailing yacht down the Caledonian canal.
I used the Seagull regularly on the clinker boats despite the transom height being too much. It's a gutsy motor and even in a stiff breeze would move the heavy wooden boat against the wind.
I can see however that the F6CMH is going to be more capable and with the external tank much easier than trying to fill the Seagull's tank boning on the waves!
I'm taking it easy to start with as my wife has no experience with boating and so far is enjoying the experience.
Andy

Tequila Scotland
I'm New
Posts: 16
Joined: 15 Aug 2023, 20:53
Boat Make: Boatworld 3.2m Air Floor
Outboard: Yamaha F6C
MMSI Number: 235934708
Location: Inverness
Has thanked: 8 times
Been thanked: 2 times

Re: Hi all, Andy from Scotland just joining

Post by Tequila » 19 Aug 2023, 18:04

Tequila wrote: ↑
19 Aug 2023, 18:02
Hi Martin
Thanks for the welcome message.
It's great to have my own boat modest as it may be!
My only boating since owning the Campari as a teenager has been using clinker wooden boats for loch fishing and helping a friend with a 13m sailing yacht down the Caledonian canal.
I used the Seagull regularly on the clinker boats despite the transom height being too much. It's a gutsy motor and even in a stiff breeze would move the heavy wooden boat against the wind.
I can see however that the F6CMH is going to be more capable and with the external tank much easier than trying to fill the Seagull's tank bobing on the waves!
I'm taking it easy to start with as my wife has no experience with boating and so far is enjoying the experience.
Andy

Tequila Scotland
I'm New
Posts: 16
Joined: 15 Aug 2023, 20:53
Boat Make: Boatworld 3.2m Air Floor
Outboard: Yamaha F6C
MMSI Number: 235934708
Location: Inverness
Has thanked: 8 times
Been thanked: 2 times

Re: Hi all, Andy from Scotland just joining

Post by Tequila » 19 Aug 2023, 18:45

Tequila wrote: ↑
19 Aug 2023, 18:02
Hi Martin
Thanks for the welcome message.
It's great to have my own boat modest as it may be!
My only boating since owning the Campari as a teenager has been using clinker wooden boats for loch fishing and helping a friend with a 13m sailing yacht down the Caledonian canal.
I used the Seagull regularly on the clinker boats despite the transom height being too much. It's a gutsy motor and even in a stiff breeze would move the heavy wooden boat against the wind.
I can see however that the F6CMH is going to be more capable and with the external tank much easier than trying to fill the Seagull's tank bobbing on the waves!
I'm taking it easy to start with as my wife has no experience with boating and so far is enjoying the experience.
Andy

Tequila Scotland
I'm New
Posts: 16
Joined: 15 Aug 2023, 20:53
Boat Make: Boatworld 3.2m Air Floor
Outboard: Yamaha F6C
MMSI Number: 235934708
Location: Inverness
Has thanked: 8 times
Been thanked: 2 times

Re: Hi all, Andy from Scotland just joining

Post by Tequila » 19 Aug 2023, 18:47

Hi Martin
Thanks for the welcome message.
It's great to have my own boat modest as it may be!
My only boating since owning the Campari as a teenager has been using clinker wooden boats for loch fishing and helping a friend with a 13m sailing yacht down the Caledonian canal.
I used the Seagull regularly on the clinker boats despite the transom height being too much. It's a gutsy motor and even in a stiff breeze would move the heavy wooden boat against the wind.
I can see however that the F6CMH is going to be more capable and with the external tank much easier than trying to fill the Seagull's tank bobbing on the waves!
I'm taking it easy to start with as my wife has no experience with boating and so far is enjoying the experience.
Andy

User avatar
rogerblack Great Britain
Supporting Member
Posts: 884
Joined: 02 Jun 2015, 19:51
Boat Make: Honwave T32ie airfloor
Outboard: Mercury 15hp 2-st
MMSI Number: 235913495
Location: Fife, Scotland & Wokingham,Berkshire
Has thanked: 209 times
Been thanked: 240 times

Re: Hi all, Andy from Scotland just joining

Post by rogerblack » 20 Aug 2023, 16:21

Hi and welcome from down in the East Neuk of Fife.
Look forward to seeing more pics and maybe videos of your floaty trips.
cheers
Roger

:fishing
“Teach a man to fish and he’ll turn around and try to teach you to fish like he invented it and you’re an idiot”

Tequila Scotland
I'm New
Posts: 16
Joined: 15 Aug 2023, 20:53
Boat Make: Boatworld 3.2m Air Floor
Outboard: Yamaha F6C
MMSI Number: 235934708
Location: Inverness
Has thanked: 8 times
Been thanked: 2 times

Re: Hi all, Andy from Scotland just joining

Post by Tequila » 21 Aug 2023, 10:32

Thanks for the welcome Roger.
We'll be back to the Gairloch area as it's quite sheltered and an interesting coastline. There's a slip near by the harbour that we'll use as it will be a day trip from home rather than the camp site slip at Big Sand.
Also plan to visit Arisaig in September so will post some pics from that trip.
I'll certainly be posting more pics and trip reports.
I'm finding the forum a mine of useful information
Andy

JORDAN Scotland
I'm New
Posts: 6
Joined: 24 May 2023, 09:25
Boat Make: F-RIB 330
Outboard: 4 Stroke YAMAHA 6HP
MMSI Number: 10
Location: Aberdeen
Has thanked: 0
Been thanked: 2 times

Re: Hi all, Andy from Scotland just joining

Post by JORDAN » 23 Aug 2023, 12:47

Hi Andy

My name is Jordan , I am 56yo this year and I live in Aberdeen.

I also have a pretty much same setup as yours, with a 3.3m inflatable boat and a 6hp yamaha and I am looking to find someone with a similar setup who is willing to go on wee trips 2-3 days or longer on the sea or sea lochs and eventually stay over night camping.

I am doing this for the past 10 years and I have explored my local sea coastal waters NE Scotland and also some North of Scotland ( Kyle of Tongue area )

It would be nice to start exploring the west coastal sea waters or sea lochs.

I will have few days off in September between 9-19, so if that suits you we can make a plan together.

Wish you all the best and hope to meet you soon.
--------------------------------------------------------------------------------------------
“The whole purpose of learning is to turn mirrors into windows.”
--------------------------------------------------------------------------------------------

Post Reply

Return to “Introduce Yourself --------- *******NEW MEMBER”