Shopping
-
Roy54
- Veteran Member
- Posts: 310
- Joined: 26 Nov 2018, 19:04
- Boat Make: Zodiac Pro 500
- Outboard: Yamaha 60 EFI
- MMSI Number: 10
- Location: Southampton
- Has thanked: 124 times
- Been thanked: 74 times
Shopping
Saturday morning spent at Pacer marine, I've picked up four life jackets , and an anchor with chain and warp . I had been advised to go for a Bruce anchor , but couldn't remember the name Bruce and ended up with a Danforth !! Will that be ok or shall I try and change it ?? I imagine I will use it mostly whilst at sandy beaches! Picking up the Zodiac next Saturday , can't remember the last time I was this excited . !!
-
chris moody
- Mega Poster, I Really Need To Get Out More !
- Posts: 2348
- Joined: 24 Mar 2015, 12:19
- Boat Make: Takacat 3.4
- Outboard: Tohatsu 9.8 2s
- MMSI Number: 235900806
- Location: Braunston
- Has thanked: 146 times
- Been thanked: 443 times
Re: Shopping
Danforth are good as well as bruce, I’d keep it.
- These users thanked the author chris moody for the post (total 2):
- Roy54 (09 Feb 2019, 22:46) • Sarah (10 Feb 2019, 10:39)
Chris Moody
Taka Tigga: Takacat 3.4 Tohatsu 9.8
Taka Tigga: Takacat 3.4 Tohatsu 9.8
-
harrison
- Mega Poster, I Really Need To Get Out More !
- Posts: 1846
- Joined: 18 Mar 2015, 17:14
- Boat Make: XS500/Merc340/Elling/Bic
- Outboard: Mariner60,20,3.5,Tohatsu9.8,Hon2.3,ThrustMe Kicker
- Location: Midlands & Up North
- Has thanked: 284 times
- Been thanked: 746 times
Re: Shopping
Oooh! picking up the Zodiac. Yabba Dabba Doo!
Both types of anchor good, just down to personal preference, prevailing bottoms etc...ooer!
Bruce/claw type good all rounder, easy to set 3 claw design, bulky to store, although not too sharpe/rounded edges.
Danforth good in sand/mud, more compact as folding, has sharper edges and sometimes slower to set.
Would imagine either will suit. Enough warp and chain is probably more relevant to successful anchoring than actual type.
Both types of anchor good, just down to personal preference, prevailing bottoms etc...ooer!
Bruce/claw type good all rounder, easy to set 3 claw design, bulky to store, although not too sharpe/rounded edges.
Danforth good in sand/mud, more compact as folding, has sharper edges and sometimes slower to set.
Would imagine either will suit. Enough warp and chain is probably more relevant to successful anchoring than actual type.
harrison
'The Beatings Will Continue Until Morale Improves'
'The Beatings Will Continue Until Morale Improves'
-
ChrisParish
- Supporting Member
- Posts: 2049
- Joined: 23 May 2018, 15:30
- Boat Make: Bombard Aerotec 380
- Outboard: Suzuki DF20A
- MMSI Number: 235916094
- Location: Poole
- Has thanked: 123 times
- Been thanked: 636 times
Re: Shopping
With 3m of heavy chain attached, even my grapnel anchor is effective in sand.
Not a complete idiot - some parts are missing.
-
Roy54
- Veteran Member
- Posts: 310
- Joined: 26 Nov 2018, 19:04
- Boat Make: Zodiac Pro 500
- Outboard: Yamaha 60 EFI
- MMSI Number: 10
- Location: Southampton
- Has thanked: 124 times
- Been thanked: 74 times
Re: Shopping
Thanks guys , can't wait to get it now . It's in the workshop now , and they are going to reglue the seat upholstery on the underside of the squab as the edges are just starting to lift . Also there is a tiny tear on the back of the seat back (where the catch is) which they are going to repair. I'm really pleased with that because I thought they were a couple of jobs I would have to do over the summer! The only other thing is a small mark on the console where it looks like something has dropped and just glanced off it , and left a blue mark. Probably come off with Acetone.
Roy
Roy
-
ChrisParish
- Supporting Member
- Posts: 2049
- Joined: 23 May 2018, 15:30
- Boat Make: Bombard Aerotec 380
- Outboard: Suzuki DF20A
- MMSI Number: 235916094
- Location: Poole
- Has thanked: 123 times
- Been thanked: 636 times
Re: Shopping
I’d try a bit of t-cut. Works wonders on gelcoat.
- These users thanked the author ChrisParish for the post:
- Roy54 (09 Feb 2019, 22:45)
Not a complete idiot - some parts are missing.
-
Andy
- Super Poster
- Posts: 613
- Joined: 04 Sep 2018, 12:49
- Boat Make: Mercury 460, Elling 350
- Outboard: Suzuki 60HP, 2.5hp
- MMSI Number: 235917838
- Location: Bedford Beach
- Has thanked: 110 times
- Been thanked: 126 times
- Contact:
Re: Shopping
@harrison
If you are as excited as I was, then your excited !
Just waiting to see the pics now ! Then the video ! Then borrow someones flying camera for an action shot. Then it kitted out for fishing ! So some work still to do lol !
Now now !prevailing bottoms
If you are as excited as I was, then your excited !
Just waiting to see the pics now ! Then the video ! Then borrow someones flying camera for an action shot. Then it kitted out for fishing ! So some work still to do lol !
-
Sarah
- Supporting Member
- Posts: 386
- Joined: 18 Feb 2018, 20:05
- Location: Poole
- Has thanked: 362 times
- Been thanked: 123 times
- Contact:
Re: Shopping
Love to see this this level of enthusiasm - its infectious! It'll soon be blue skies again. Have fun with your new boat and do post some pics.
Please feel free to ask questions about training & RYA qualifications, if you're not local we will try to point you in the right direction!
Dorset Marine Training, Poole - 01202 901267, www.dorsetmarinetraining.co.uk
sarah@dorsetmarinetraining.co.uk
Dorset Marine Training, Poole - 01202 901267, www.dorsetmarinetraining.co.uk
sarah@dorsetmarinetraining.co.uk
-
Roy54
- Veteran Member
- Posts: 310
- Joined: 26 Nov 2018, 19:04
- Boat Make: Zodiac Pro 500
- Outboard: Yamaha 60 EFI
- MMSI Number: 10
- Location: Southampton
- Has thanked: 124 times
- Been thanked: 74 times
Re: Shopping
Ah! The fishing thing. My son has been going on at me for ages about going fishing ,but I know less about fishing than I do about boats. Pre teenager I used to go course fishing with my dad and then I did a bit on two boating holiday s , once on the Thames and once on the Caledonian canal. Both times it was using a spinner. Caught some fish, and in Scotland we caught an old fuel tank! Lol , We really thought " this is a big un"
-
Sarah
- Supporting Member
- Posts: 386
- Joined: 18 Feb 2018, 20:05
- Location: Poole
- Has thanked: 362 times
- Been thanked: 123 times
- Contact:
Re: Shopping
ref fishing - Dom is currently raving about a new book he has found on fishing and boating - I'll get him to pop online and add the title
Please feel free to ask questions about training & RYA qualifications, if you're not local we will try to point you in the right direction!
Dorset Marine Training, Poole - 01202 901267, www.dorsetmarinetraining.co.uk
sarah@dorsetmarinetraining.co.uk
Dorset Marine Training, Poole - 01202 901267, www.dorsetmarinetraining.co.uk
sarah@dorsetmarinetraining.co.uk


