I'll fit a rudder on the other side
F-rib 2.75, 6hp set-up.
-
stevexxxuk
- Active Member
- Posts: 72
- Joined: 07 Sep 2019, 22:11
- Boat Make: F-rib 330, Bonwitco 14'
- Outboard: Tanaka 1.2hp, Yamaha 6hp,
- MMSI Number: 10
- Location: Aberystwyth
- Has thanked: 25 times
- Been thanked: 3 times
Re: F-rib 2.75, 6hp set-up.
Last edited by stevexxxuk on 06 Oct 2019, 12:32, edited 1 time in total.
-
stevexxxuk
- Active Member
- Posts: 72
- Joined: 07 Sep 2019, 22:11
- Boat Make: F-rib 330, Bonwitco 14'
- Outboard: Tanaka 1.2hp, Yamaha 6hp,
- MMSI Number: 10
- Location: Aberystwyth
- Has thanked: 25 times
- Been thanked: 3 times
Re: F-rib 2.75, 6hp set-up.
Once I get the boat I'll know better how or if it will work out.. Hopefully off to have a good look at them in a week or two..
-
stevexxxuk
- Active Member
- Posts: 72
- Joined: 07 Sep 2019, 22:11
- Boat Make: F-rib 330, Bonwitco 14'
- Outboard: Tanaka 1.2hp, Yamaha 6hp,
- MMSI Number: 10
- Location: Aberystwyth
- Has thanked: 25 times
- Been thanked: 3 times
Re: F-rib 2.75, 6hp set-up.
I wonder if anyone would disagree that a 330 f-rib with 6hp is reasonably handled by one man up and down the average beach on wheels ignoring soft sand and shingles builders rocks and stones etc?.. Taking some of the advice given i'm looking at this over the 275 for the extra room.
-
harrison
- Mega Poster, I Really Need To Get Out More !
- Posts: 1846
- Joined: 18 Mar 2015, 17:14
- Boat Make: XS500/Merc340/Elling/Bic
- Outboard: Mariner60,20,3.5,Tohatsu9.8,Hon2.3,ThrustMe Kicker
- Location: Midlands & Up North
- Has thanked: 284 times
- Been thanked: 746 times
Re: F-rib 2.75, 6hp set-up.
In my humble opinion the 7kg extra weight will be hardly noticeable trundling across the beach, but the 550mm extra length will make a mahoosive benefit to deck space and more importantly comfort/sea keeping in even a mild chop. Should also be as fast, or even a tad quicker, than the 275 with the same 6hp motor.
Of course, it’ll be a slightly bigger and heavier package to load in/out of your vehicle.
Of course, it’ll be a slightly bigger and heavier package to load in/out of your vehicle.
harrison
'The Beatings Will Continue Until Morale Improves'
'The Beatings Will Continue Until Morale Improves'
-
stevexxxuk
- Active Member
- Posts: 72
- Joined: 07 Sep 2019, 22:11
- Boat Make: F-rib 330, Bonwitco 14'
- Outboard: Tanaka 1.2hp, Yamaha 6hp,
- MMSI Number: 10
- Location: Aberystwyth
- Has thanked: 25 times
- Been thanked: 3 times
Re: F-rib 2.75, 6hp set-up.
Thanks, that's about what I was thinking, hopefully tomorrow I will be the proud owner of an f-rib though I think its an import as it also has Winboat, russia stamped on the plate..
-
Andy
- Super Poster
- Posts: 613
- Joined: 04 Sep 2018, 12:49
- Boat Make: Mercury 460, Elling 350
- Outboard: Suzuki 60HP, 2.5hp
- MMSI Number: 235917838
- Location: Bedford Beach
- Has thanked: 110 times
- Been thanked: 126 times
- Contact:
Re: F-rib 2.75, 6hp set-up.
@harrison
I see your building up quiet a boatyard of stuff !
"Boat Make: XS500, T38, Bic Sportyak
Outboard: Mariner 60, 20, 3.5, Honda 2.3"
Expecting a high tide in Derby later or summit ?
I see your building up quiet a boatyard of stuff !
"Boat Make: XS500, T38, Bic Sportyak
Outboard: Mariner 60, 20, 3.5, Honda 2.3"
Expecting a high tide in Derby later or summit ?
-
harrison
- Mega Poster, I Really Need To Get Out More !
- Posts: 1846
- Joined: 18 Mar 2015, 17:14
- Boat Make: XS500/Merc340/Elling/Bic
- Outboard: Mariner60,20,3.5,Tohatsu9.8,Hon2.3,ThrustMe Kicker
- Location: Midlands & Up North
- Has thanked: 284 times
- Been thanked: 746 times
Re: F-rib 2.75, 6hp set-up.
Yeah. Well canna be too careful laddy.
Wot wiv global warming and all that!
Wot wiv global warming and all that!
harrison
'The Beatings Will Continue Until Morale Improves'
'The Beatings Will Continue Until Morale Improves'
-
ChrisParish
- Supporting Member
- Posts: 2049
- Joined: 23 May 2018, 15:30
- Boat Make: Bombard Aerotec 380
- Outboard: Suzuki DF20A
- MMSI Number: 235916094
- Location: Poole
- Has thanked: 123 times
- Been thanked: 636 times
Re: F-rib 2.75, 6hp set-up.
Yup. If the sea level goes up a few feet then Doncaster would be a coastal town....
Needs to go up about 160ft before Derby is in trouble!
Needs to go up about 160ft before Derby is in trouble!
Not a complete idiot - some parts are missing.
-
stevexxxuk
- Active Member
- Posts: 72
- Joined: 07 Sep 2019, 22:11
- Boat Make: F-rib 330, Bonwitco 14'
- Outboard: Tanaka 1.2hp, Yamaha 6hp,
- MMSI Number: 10
- Location: Aberystwyth
- Has thanked: 25 times
- Been thanked: 3 times
Re: F-rib 2.75, 6hp set-up.
If it rises here it would be a short walk to a sheltered anchorage in the valley below. about 50' would do nicely.
Anyways after 12 hours driving over 2 days finally got my frib
, really nice condition, just a little mark on the rear fabric which I'm sure will clean off, underside almost unmarked, looks hardly used, came with 2 seats, seat cushion and zip in bag, wheels, anchor kit, all the normal kit and a bravo12 air pump for less than the price of the 275 so well happy... Just got to find a nice little lightweight 6hp to go on the back now... Thanks again for everyone's help and advice.
Anyways after 12 hours driving over 2 days finally got my frib


