Aqua Marina Aircat 3.35

An Inflatable Catamaran range of boats
Post Reply
Tris10 England
Newish Member, But I Like It Here
Posts: 31
Joined: 01 Jun 2022, 08:41
MMSI Number: 10
Location: Teignmouth
Has thanked: 12 times
Been thanked: 5 times

Aqua Marina Aircat 3.35

Post by Tris10 » 05 Jun 2022, 19:43

Thought the best place to put place was in here as it's a catamaran.
Picked up an Aqua Marina Aircat 3.35 + Suzuki DF9.9A as our first entry into SIBing.
It arrived Friday so we managed to get it put together and out for a first run. Initial impressions are good - it's obviously a budget boat so I was expecting some issues, quirks and a few bits that I wasn't happy with, but was surprised with only a couple of bits to tweak.
The engine worked well on the boat from the off - I will play with the prop as there is a bit of cavitation when getting on the plane, but it runs well two up - we hit 17kts max and cruised easily at 13/14kts.
I think it will serve us well for our intended purpose of short trips, with the occasional day trip and is light enough to pack in the car easily.

bun Scotland
Advanced Member
Posts: 185
Joined: 14 May 2018, 08:46
Boat Make: boatworld 330 v floor
Outboard: tohatsu 4stroke 6hp
MMSI Number: 10
Location: Edinburgh
Has thanked: 1 time
Been thanked: 20 times

Re: Aqua Marina Aircat 3.35

Post by bun » 27 May 2025, 01:46

Just bought one from maelstrom boats, Air kat 3.35 have a 5 hp outboard yam 4stroke never had it out on the water yet, want it for places i cant get into with my or launch 365 carbon pro , i think a 5 hp will be ok for dabbling around the rocks well away from them very happy with the boa,t have to get the floor pushed down and into place then inflate the tubes ,the floor to 15psi a lot of pressure there it settled no problem now taking one of the seats from the 365 changed the pegs that fit in , used gorilla tape put over the aluminium as its a different fitment put2 Lomo paddle foam floats over the aluminium seat now got a nice comfy seat and the big seat that came with it, will go to the front have a Lowrance fish finder and one will go the seat, have an other two rod holders that will fit onto the transom also got some good transom wheels that lift up got a good deal on them for the boat so at present have the Air cat on top pf the 365 carbon pro on the trailer , my IDEA IS if i want the carbln pro i w e just lift it off snf put it in the garage in i want the 365 take the two boats off and put the air cat on with the 5 hp on the transom wit transom saver im lovin thinking about getting out on it well both really love the BLACK DOUGLAS AND THE WHITE WOLF HAPPY AS APIG IN SHITE
ohyeh

bun Scotland
Advanced Member
Posts: 185
Joined: 14 May 2018, 08:46
Boat Make: boatworld 330 v floor
Outboard: tohatsu 4stroke 6hp
MMSI Number: 10
Location: Edinburgh
Has thanked: 1 time
Been thanked: 20 times

Re: Aqua Marina Aircat 3.35

Post by bun » 23 Jun 2025, 04:54

there was a guy testing it out on youtube with a 9.9 as well think he opted after doing them all for no one pin thats what im going to start off with as well on the 365 i have it on pin 3 pin4 was cavitating to much
:chat

Post Reply

Return to “Takacat”