How far can I carry a 20hp outboard Video
-
gwozhog
- Advanced Member
- Posts: 295
- Joined: 27 Apr 2016, 20:28
- Boat Make: Achilles spd310 and sg124
- Outboard: Yamaha 8hp
Yamaha 15hp
Nissan 15hp - Location: Point Blank, Texas
- Has thanked: 16 times
- Been thanked: 48 times
Re: How far can I carry a 20hp outboard Video
check out this dude. This has to be atleast a 30hp
I once dated a girl in High School and her Father told me I would never amount to anything. He was right!
-
Martin
- Supporting Member
- Posts: 5789
- Joined: 30 Dec 2014, 13:05
- Boat Make: F-Rib 3.75 - Special
- Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
- MMSI Number: 123456789
- Location: Huddersfield - West Yorkshire
- Has thanked: 1416 times
- Been thanked: 782 times
- Contact:
Re: How far can I carry a 20hp outboard Video
Oh yeh!
One arm around the bottom of the power head pulling it into your chest area, and other arm stretched out down the leg supporting the physical weight of it, carry it like your playing “thunderstruck” - and we need that playing in the third video whilst you do your third lap around the tree!
Go Gwoz !!
F-RibsAndSibs.Com.... 
Because it's a big old WWworld out there
Because it's a big old WWworld out there
-
gwozhog
- Advanced Member
- Posts: 295
- Joined: 27 Apr 2016, 20:28
- Boat Make: Achilles spd310 and sg124
- Outboard: Yamaha 8hp
Yamaha 15hp
Nissan 15hp - Location: Point Blank, Texas
- Has thanked: 16 times
- Been thanked: 48 times
Re: How far can I carry a 20hp outboard Video
One more video for the win!
I once dated a girl in High School and her Father told me I would never amount to anything. He was right!
-
Tyger
- Advanced Member
- Posts: 158
- Joined: 30 Jun 2021, 17:31
- Boat Make: Takacat 380 lx
- Outboard: Tohatsu 20 hp
- MMSI Number: 10
- Location: Manchester
- Has thanked: 84 times
- Been thanked: 24 times
-
Oldman
- Advanced Member
- Posts: 248
- Joined: 12 Jun 2020, 10:41
- Boat Make: Elling KB350 SIB
- Outboard: Yamaha 15hp 2 stroke
- Location: North Kent
- Has thanked: 149 times
- Been thanked: 51 times
-
gwozhog
- Advanced Member
- Posts: 295
- Joined: 27 Apr 2016, 20:28
- Boat Make: Achilles spd310 and sg124
- Outboard: Yamaha 8hp
Yamaha 15hp
Nissan 15hp - Location: Point Blank, Texas
- Has thanked: 16 times
- Been thanked: 48 times
Re: How far can I carry a 20hp outboard Video
Man that’s impressive watching him go down those stairs. I will have to train harder and shoot for the tree ten houses down
I once dated a girl in High School and her Father told me I would never amount to anything. He was right!
-
Martin
- Supporting Member
- Posts: 5789
- Joined: 30 Dec 2014, 13:05
- Boat Make: F-Rib 3.75 - Special
- Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
- MMSI Number: 123456789
- Location: Huddersfield - West Yorkshire
- Has thanked: 1416 times
- Been thanked: 782 times
- Contact:
Re: How far can I carry a 20hp outboard Video
I was going to reply to your Sri- Lankan man image and tell you to avoid carrying the outboard like that as you may send the sump oil in the wrong direction.. no doubt you’ll have found that out now if it did indeed go wrong?
On a four stroke, the power head must always be higher than the leg, which in your case it was.
But notice when you were carrying it, the outboard was in like a reverse tilt mode, unless the outboard is a four sided storage, or the sump has a guard inside to stop oil flow, you could cause problems.
Hopefully you’ve not seen any oil around the leg ?
Martin
F-RibsAndSibs.Com.... 
Because it's a big old WWworld out there
Because it's a big old WWworld out there
-
Limecc
- Advanced Member
- Posts: 235
- Joined: 06 Jan 2019, 12:25
- Boat Make: Ranieri Revolution 15
- Outboard: Suzuki DF60a
- MMSI Number: 10
- Location: J28 Notts
- Has thanked: 65 times
- Been thanked: 62 times
Re: How far can I carry a 20hp outboard Video
Those 40hp 2T Yam engines weigh in at 75kg, more than he probably weighs. The guy needed help getting it on his shoulder, not sure I'd want to risk dropping it by misplacing my footing. Carrying engines is often over obstacles or unstable ground. Glad mine stays firmly bolted on the transom.



