Fenders

[eddzoid]

Does anyone have the name of their boat on the fenders?

[RONHAS]

Does anyone have the name of their boat on the fenders?image.jpg

Pretty cool

I've bought different type of fender and maybe I'll do something like you

[Roy54]

I have 2 of those so called rib fenders, I find them worse than useless as they are never at the right height for the various jetties I moor at. I reckon they will be ideal against a wall though. I have bought 4 fenders (2 sets of 2) where the rope can pass right through which enables me to have a fender on top of the tubes as well as over the side.

[RONHAS]

I have 2 of those so called rib fenders, I find them worse than useless as they are never at the right height for the various jetties I moor at. I reckon they will be ideal against a wall though. I have bought 4 fenders (2 sets of 2) where the rope can pass right through which enables me to have a fender on top of the tubes as well as over the side.

Any pics you could share here with us?

[Roy54]

I have done this as I said to protect the side of the tube and top because I found on some jetties my boat would go just under the boardwalk and scratch. It was a bugger to find the fenders with a hole right through. Eventually found them on ebay I think. I'll try and find it and post the link.
Roy

[Roy54]

The flat fenders are a pain because if you set them low enough to protect the side, there is little or no protection on top. Set to high and the side is exposed. I had thought about making fresh holes and using them vertically but then decided I like the dual fender idea.

[RONHAS]

The flat fenders are a pain because if you set them low enough to protect the side, there is little or no protection on top. Set to high and the side is exposed. I had thought about making fresh holes and using them vertically but then decided I like the dual fender idea.

Agreed regarding flat fenders, but mine are nor flat but curved, which can easily be adapted to the tubes. I've choosed the one with big size.

[Roy54]

They do look better than mine, hope they work for you.
Roy

[Roy54]

If anyone is interested they are from "The Candlery Barge" on ebay and are called Thru line fenders.

[RONHAS]

They do look better than mine, hope they work for you.
Roy

They certainly will once they were bought mainly due to what I've wrote here: viewtopic.php?f=6&p=43718#p43718
Thanks for your pics