And so it begins!
-
Goon
- Newish Member, But I Like It Here
- Posts: 26
- Joined: 23 Jun 2019, 17:30
- Boat Make: Excel vanguard 335
- Outboard: Suzuki 15hp s
- MMSI Number: 10
- Location: Derby
- Has thanked: 12 times
- Been thanked: 4 times
And so it begins!
Hello fellow boaters.
Steve here got redirected from facebook to join the fold. Been looking for a sib since coming back from holiday last week. Did lots of research following and decided on an excell 3.5 vanguard tho i dont pick up until next week as im having launch wheels installed for ease when sibing solo. Im quoting about for a 15hp Suzuki outboard atm i think thats my favoured choice.
Anyway getting lost abit here.. me and my mrs are here to find any folk that could help get us started as we are new to boats and would love to experienced minds to go out with.
Im based in derby so pretty central for outings
I have lots to say so ill end it here and shut up.
Nice to be here.
Steve.
Steve here got redirected from facebook to join the fold. Been looking for a sib since coming back from holiday last week. Did lots of research following and decided on an excell 3.5 vanguard tho i dont pick up until next week as im having launch wheels installed for ease when sibing solo. Im quoting about for a 15hp Suzuki outboard atm i think thats my favoured choice.
Anyway getting lost abit here.. me and my mrs are here to find any folk that could help get us started as we are new to boats and would love to experienced minds to go out with.
Im based in derby so pretty central for outings
I have lots to say so ill end it here and shut up.
Nice to be here.
Steve.
-
Martin
- Supporting Member
- Posts: 5789
- Joined: 30 Dec 2014, 13:05
- Boat Make: F-Rib 3.75 - Special
- Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
- MMSI Number: 123456789
- Location: Huddersfield - West Yorkshire
- Has thanked: 1416 times
- Been thanked: 782 times
- Contact:
Re: And so it begins!
Hi Steve, Welcome aboard..
The excels are well built boats and have a good following.. Fingers crossed it suits your needs.
The Suzuki is a cracking engine without a doubt, Though bare in mind the 9.9hp, 15hp and the 20hp are the same weight... So if money isn't so much of an issue i'd be tempted to look at the 20hp.
Enjoy the forum,
Martin
The excels are well built boats and have a good following.. Fingers crossed it suits your needs.
The Suzuki is a cracking engine without a doubt, Though bare in mind the 9.9hp, 15hp and the 20hp are the same weight... So if money isn't so much of an issue i'd be tempted to look at the 20hp.
Enjoy the forum,
Martin
F-RibsAndSibs.Com.... 
Because it's a big old WWworld out there
Because it's a big old WWworld out there
-
Goon
- Newish Member, But I Like It Here
- Posts: 26
- Joined: 23 Jun 2019, 17:30
- Boat Make: Excel vanguard 335
- Outboard: Suzuki 15hp s
- MMSI Number: 10
- Location: Derby
- Has thanked: 12 times
- Been thanked: 4 times
Re: And so it begins!
Thanks for the welcome.Martin wrote: ↑23 Jun 2019, 18:02Hi Steve, Welcome aboard..
The excels are well built boats and have a good following.. Fingers crossed it suits your needs.
The Suzuki is a cracking engine without a doubt, Though bare in mind the 9.9hp, 15hp and the 20hp are the same weight... So if money isn't so much of an issue i'd be tempted to look at the 20hp.
Enjoy the forum,
Martin![]()
The boat is 15hp max so didnt think looking at the 20hp would be worth while.?
-
Sarah
- Supporting Member
- Posts: 386
- Joined: 18 Feb 2018, 20:05
- Location: Poole
- Has thanked: 362 times
- Been thanked: 123 times
- Contact:
Re: And so it begins!
Please feel free to ask questions about training & RYA qualifications, if you're not local we will try to point you in the right direction!
Dorset Marine Training, Poole - 01202 901267, www.dorsetmarinetraining.co.uk
sarah@dorsetmarinetraining.co.uk
Dorset Marine Training, Poole - 01202 901267, www.dorsetmarinetraining.co.uk
sarah@dorsetmarinetraining.co.uk
-
Martin
- Supporting Member
- Posts: 5789
- Joined: 30 Dec 2014, 13:05
- Boat Make: F-Rib 3.75 - Special
- Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
- MMSI Number: 123456789
- Location: Huddersfield - West Yorkshire
- Has thanked: 1416 times
- Been thanked: 782 times
- Contact:
Re: And so it begins!
WGoon wrote: ↑23 Jun 2019, 18:11Thanks for the welcome.Martin wrote: ↑23 Jun 2019, 18:02Hi Steve, Welcome aboard..
The excels are well built boats and have a good following.. Fingers crossed it suits your needs.
The Suzuki is a cracking engine without a doubt, Though bare in mind the 9.9hp, 15hp and the 20hp are the same weight... So if money isn't so much of an issue i'd be tempted to look at the 20hp.
Enjoy the forum,
Martin![]()
The boat is 15hp maxso didnt think looking at the 20hp would be worth while.?best not push my boats luck on capabilities lol.
I'll have to do my homework better
Martin
F-RibsAndSibs.Com.... 
Because it's a big old WWworld out there
Because it's a big old WWworld out there
-
Goon
- Newish Member, But I Like It Here
- Posts: 26
- Joined: 23 Jun 2019, 17:30
- Boat Make: Excel vanguard 335
- Outboard: Suzuki 15hp s
- MMSI Number: 10
- Location: Derby
- Has thanked: 12 times
- Been thanked: 4 times
Re: And so it begins!
No worries i could be wrong. Ill double check. I think the honwaves in similar size take the 20hp.. i was surprised also.Martin wrote: ↑23 Jun 2019, 18:13WGoon wrote: ↑23 Jun 2019, 18:11Thanks for the welcome.Martin wrote: ↑23 Jun 2019, 18:02Hi Steve, Welcome aboard..
The excels are well built boats and have a good following.. Fingers crossed it suits your needs.
The Suzuki is a cracking engine without a doubt, Though bare in mind the 9.9hp, 15hp and the 20hp are the same weight... So if money isn't so much of an issue i'd be tempted to look at the 20hp.
Enjoy the forum,
Martin![]()
The boat is 15hp maxso didnt think looking at the 20hp would be worth while.?best not push my boats luck on capabilities lol.
W, Excuse my ignorance... that has suprised me.
I'll have to do my homework better
Martin![]()
-
harrison
- Mega Poster, I Really Need To Get Out More !
- Posts: 1846
- Joined: 18 Mar 2015, 17:14
- Boat Make: XS500/Merc340/Elling/Bic
- Outboard: Mariner60,20,3.5,Tohatsu9.8,Hon2.3,ThrustMe Kicker
- Location: Midlands & Up North
- Has thanked: 284 times
- Been thanked: 746 times
Re: And so it begins!
Hey Goon, welcome to the madhouse. Some good chat and occasionally, very occasionally some good advice can even be found here.
@Martin not going mad. Don’t think Excel make a 3.5. Assume Goon is going for the 335.
PS: Also based in same land locked city.
@Martin not going mad. Don’t think Excel make a 3.5. Assume Goon is going for the 335.
PS: Also based in same land locked city.
harrison
'The Beatings Will Continue Until Morale Improves'
'The Beatings Will Continue Until Morale Improves'
-
Goon
- Newish Member, But I Like It Here
- Posts: 26
- Joined: 23 Jun 2019, 17:30
- Boat Make: Excel vanguard 335
- Outboard: Suzuki 15hp s
- MMSI Number: 10
- Location: Derby
- Has thanked: 12 times
- Been thanked: 4 times
Re: And so it begins!
Ah yes the 335 my mistake. This one is right.
http://www.excel-inflatables.co.uk/infl ... xhd335.php
Someone else from the land of misery! How silly we choose a water hobby the furthest you can get from the sea! Lol
-
Goon
- Newish Member, But I Like It Here
- Posts: 26
- Joined: 23 Jun 2019, 17:30
- Boat Make: Excel vanguard 335
- Outboard: Suzuki 15hp s
- MMSI Number: 10
- Location: Derby
- Has thanked: 12 times
- Been thanked: 4 times
Re: And so it begins!
Harrison out of interest as your local. Where do you launch from the most.? I need a nice large easy place to run in my new motor. I'm looking into Carsington water if allows motor boats but I'm not holding my breath
Thinking driving up to Scarborough harbour and trying there. Tho I'm wary about the sea for my first launch. Id most likely never be heard from again haha
Im not sure canals would be ideal for this but when its ran in its something i will try.
Any recommendations would be great
Very interested in any ride outs this year if one is organised
Thinking driving up to Scarborough harbour and trying there. Tho I'm wary about the sea for my first launch. Id most likely never be heard from again haha
Im not sure canals would be ideal for this but when its ran in its something i will try.
Any recommendations would be great
Very interested in any ride outs this year if one is organised
-
Martin
- Supporting Member
- Posts: 5789
- Joined: 30 Dec 2014, 13:05
- Boat Make: F-Rib 3.75 - Special
- Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
- MMSI Number: 123456789
- Location: Huddersfield - West Yorkshire
- Has thanked: 1416 times
- Been thanked: 782 times
- Contact:
Re: And so it begins!
A day out on Ullswater (Lake District) is a great place to start..
Launch at Pooley Bridge and you have free run of the whole lake.
10mph Speed limit applies, no need to register or anything at Ullswater.
Martin
Launch at Pooley Bridge and you have free run of the whole lake.
10mph Speed limit applies, no need to register or anything at Ullswater.
Martin
F-RibsAndSibs.Com.... 
Because it's a big old WWworld out there
Because it's a big old WWworld out there



