Halmatic DS110 "Desperate" MK2
Forum rules
Please use your craft type/make/model as a header to help with the search facility.
Please use your craft type/make/model as a header to help with the search facility.
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Halmatic DS110 "Desperate" MK2
following a request from martin to re upload some pics due to photo bucket being greedy shites I figured I'd just start a new thread...so...
As some of you will know last year I took on a 46 year old boat that's been in my family for a long time. I fact I grew up on it from a very early age.
She's an unusual vessel. the hull was penned in 1968 by Don Shead (he also designed many great race boats of that era like the "Cinzano" race boat and all the performance Sunseeker's from the Offshore 31 to the predator 108 plus many more) for class 2 offshore racing, Halmatic then bought the hull and commissioned Don Shead to style a superstructure.
they made 28 cruisers between 1969 and 72 to fund the ultimate goal of making fast gun boats.
So, anyway here she is from her long drive up to me in Yorkshire after being driven up from Southampton... Below, the moment she left the trailer was a heart in mouth moment that's for sure so on to the next phase, getting the safety certificate as being on the south coast, she's never needed one...
she needed all the old diesel draining (500L), clean the tanks (all 3), replace all the fuel lines, fuel separators, fuel taps and cut offs, install a new fuel filler on the port saddle tank, renew the gas cylinder locker, gas regulator plus loads more..... below is the aft cabin emptied out with the day tank and bilge stripped. new inspection plates and filler elbow the engine room bilge cleaned, new fuel hose in readiness of the racors... racors and taps another poop my pants moment on her home berth moment of madness click on the GIF...
more will come when i find time...
As some of you will know last year I took on a 46 year old boat that's been in my family for a long time. I fact I grew up on it from a very early age.
She's an unusual vessel. the hull was penned in 1968 by Don Shead (he also designed many great race boats of that era like the "Cinzano" race boat and all the performance Sunseeker's from the Offshore 31 to the predator 108 plus many more) for class 2 offshore racing, Halmatic then bought the hull and commissioned Don Shead to style a superstructure.
they made 28 cruisers between 1969 and 72 to fund the ultimate goal of making fast gun boats.
So, anyway here she is from her long drive up to me in Yorkshire after being driven up from Southampton... Below, the moment she left the trailer was a heart in mouth moment that's for sure so on to the next phase, getting the safety certificate as being on the south coast, she's never needed one...
she needed all the old diesel draining (500L), clean the tanks (all 3), replace all the fuel lines, fuel separators, fuel taps and cut offs, install a new fuel filler on the port saddle tank, renew the gas cylinder locker, gas regulator plus loads more..... below is the aft cabin emptied out with the day tank and bilge stripped. new inspection plates and filler elbow the engine room bilge cleaned, new fuel hose in readiness of the racors... racors and taps another poop my pants moment on her home berth moment of madness click on the GIF...
more will come when i find time...
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Re: Halmatic DS110 "Desperate" MK2
Up on York Town Quay (3rd boat in front of the red tourist boat on the right)
Naburn Marina in the evening
Acaster Malbis (Ship Inn) with my friends Princess 285 rafted next to me.
Morning at Acaster malbis
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Re: Halmatic DS110 "Desperate" MK2
Halmatic's version with a 50cal machine gun on the bow...
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Re: Halmatic DS110 "Desperate" MK2
Well, Since the last post I've secured a permanent berth up on the Ouse in Acaster Malbis so at least i can use her without pissing about with locks all the time. Ok, it's not the Solent but i have a little more freedom now. The berth has fresh water and electric and is private. big enough to put a rattan table and chairs on, patio heater and so on. bit of a slice of nice!!!
I've got some solar lights around the rails to give a little light in the night, make it a bit more sociable in the summer....Plus...it's way nicer than the damn canal!!!
Last edited by Si Crowe on 27 Oct 2017, 09:45, edited 1 time in total.
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Murv
- Newish Member, But I Like It Here
- Posts: 36
- Joined: 08 Sep 2017, 10:29
- Boat Make: Honwave T32 IE
- Outboard: Evinrude 9.9 two-stroke (need a 15hp carb!)
- MMSI Number: 10
- Location: Kent
- Has thanked: 10 times
- Been thanked: 12 times
Re: Halmatic DS110 "Desperate" MK2
Wow, what an incredible boat, thanks for sharing and congratulations on the new berth!
The machine gun option looks as if it could be very handy when they're dinghy racing on the Medway
The machine gun option looks as if it could be very handy when they're dinghy racing on the Medway
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Re: Halmatic DS110 "Desperate" MK2
Yeah. i did wonder about fitting one!!! A few people comment on the hull shape being quite "military" in stance like an old MTB or patrol boat...Murv wrote:Wow, what an incredible boat, thanks for sharing and congratulations on the new berth!
The machine gun option looks as if it could be very handy when they're dinghy racing on the Medway
she's got a very deep V hull with a constant deadrise so cuts through the chop well... these are some older shots of one of her sister boats "Fast Buck" racing back in the 70's... without Radar Arch
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Re: Halmatic DS110 "Desperate" MK2
While i'm on a roll here are a few more pics.
these are some of Halmatics and Don Shead's original drawings, schematics and brochure pictures. The 2 Perkins Sabres M225ti engines on Borg Warner direct drive gear boxes look snug in there but there is full access 100% around them plus the whole cockpit sole lifts in 5 mins and can get both engines out in under 2hrs (not that you'd want to) Plus the groove they make @ 25kts cruising speed. Here are a few cockpit and helm pics. the cockpit is sparse but there are infill cushions that go across the aft cabin doors to create a full width bench seat with a cockpit table mount on the floor for alfresco munchies. The Helm seats, again are unusual, they are vintage offshore racing seats. they have an upright or reclined position so in rough sea you stand up and lean back or when calmer, recline and sit in (they look like racks but are amazingly comfy). the actual pedestals go through the cockpit sole and down 2ft on the bearer in front of the engines... very solid!! i'm hoping to remove them this winter to get them blasted and powder coated. tidy them up.
these are some of Halmatics and Don Shead's original drawings, schematics and brochure pictures. The 2 Perkins Sabres M225ti engines on Borg Warner direct drive gear boxes look snug in there but there is full access 100% around them plus the whole cockpit sole lifts in 5 mins and can get both engines out in under 2hrs (not that you'd want to) Plus the groove they make @ 25kts cruising speed. Here are a few cockpit and helm pics. the cockpit is sparse but there are infill cushions that go across the aft cabin doors to create a full width bench seat with a cockpit table mount on the floor for alfresco munchies. The Helm seats, again are unusual, they are vintage offshore racing seats. they have an upright or reclined position so in rough sea you stand up and lean back or when calmer, recline and sit in (they look like racks but are amazingly comfy). the actual pedestals go through the cockpit sole and down 2ft on the bearer in front of the engines... very solid!! i'm hoping to remove them this winter to get them blasted and powder coated. tidy them up.
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Martin
- Supporting Member
- Posts: 5789
- Joined: 30 Dec 2014, 13:05
- Boat Make: F-Rib 3.75 - Special
- Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
- MMSI Number: 123456789
- Location: Huddersfield - West Yorkshire
- Has thanked: 1416 times
- Been thanked: 782 times
- Contact:
Re: Halmatic DS110 "Desperate" MK2
She really is a thing of beauty Si, Not only do you have an awesome boat.. you've got the family history of it too...
An epic thread for a well worthy craft.
Do you have her moored up at York yet?
An epic thread for a well worthy craft.
Do you have her moored up at York yet?
F-RibsAndSibs.Com.... 
Because it's a big old WWworld out there
Because it's a big old WWworld out there
-
Si Crowe
- Veteran Member
- Posts: 585
- Joined: 24 Aug 2015, 15:29
- Boat Make: DS110, Seago 240 Airdeck
- Outboard: 2xPerkins Sabres 225HP, 5HP Mariner 2Stroke
- Location: York
- Has thanked: 180 times
- Been thanked: 115 times
Re: Halmatic DS110 "Desperate" MK2
Cheers dude.Martin wrote:She really is a thing of beauty Si, Not only do you have an awesome boat.. you've got the family history of it too...
An epic thread for a well worthy craft.
Do you have her moored up at York yet?
Yeah, she's near the Ship Inn at Acaster Malbis.
If it has t*ts, tyres or floats......it's gonna cost ya!
-
Cliff
- Veteran Member
- Posts: 321
- Joined: 31 Dec 2017, 11:47
- Boat Make: Highfield CL310 Rib
- Outboard: Tohatsu 20hp efi
Demon 5.2hp 2 smoke - Location: Sunny Wigan
- Has thanked: 95 times
- Been thanked: 66 times
Re: Halmatic DS110 "Desperate" MK2
Fantastic vessel Si, I can't supply a machine gun, but I can sort you out with a Swivel GunSi Crowe wrote:Halmatic's version with a 50cal machine gun on the bow...
https://www.castcannons.co.uk/swivel-gun-gallery/



