F-Ribs And Sibs - Inflatable Boat Community

Hi

I went out for an awesome 25 mile ride in the F-Rib down at Newhaven this Sunday.
I was wondering, how do you secure your fuel tanks down? My SIB has straps holding it down to the air floor.
I also find you need weight up front as it makes the boat go faster and handles better.

Here is a boring and sped up video of the day

I'm not sure James....
One of the F-Rib guys will be along shortly

I'm impressed with the video dashboard, what cam/app is that your using please?

Camera details are..

The Camera is Sony as100v ActionCam. The 200 or 4k camera's are out now.
There are two water proof cases
The one that comes with it, (which is the one I am using) is 16.4ft.
The other case goes down to 197ft

I prefer it to the GoPro mainly because if it's shape.

GPS over lay comes part of the editing software

James wrote: I was wondering, how do you secure your fuel tanks down? My SIB has straps holding it down to the air floor.
I also find you need weight up front as it makes the boat go faster and handles better.

James

I don't like drilling or glueing my boats unless there's no other option so I've utilised the hull connecting bolts as securing points.
I've replaced the plastic 'wing nuts' with some stainless M12 'D' nuts, 53mm OA dia and 32mm ID.
I also found some brackets laying around in the garage to place under the bolt 'head' so I've now got securing points both sides of the hull floor cross beam.
Here's the rig
I've done this to both front and rear so I've got plenty of scope for lashing things down
I've extended my fuel hose so the tank now rides permanently in the bow for added weight towards the front for ballast.

Paul

Paul wrote:

James wrote: I was wondering, how do you secure your fuel tanks down? My SIB has straps holding it down to the air floor.
I also find you need weight up front as it makes the boat go faster and handles better.

James

I don't like drilling or glueing my boats unless there's no other option so I've utilised the hull connecting bolts as securing points.
I've replaced the plastic 'wing nuts' with some stainless M12 'D' nuts, 53mm OA dia and 32mm ID.
I also found some brackets laying around in the garage to place under the bolt 'head' so I've now got securing points both sides of the hull floor cross beam.
Here's the rig

20150908_210945[1].jpg

I've done this to both front and rear so I've got plenty of scope for lashing things down
I've extended my fuel hose so the tank now rides permanently in the bow for added weight towards the front for ballast.

Paul

Thanks Paul, that's an awesome idea. I wonder if Screwfix sell those D bolts. I'll have a look on ebay later on.
Do you run a 12Lt or 22Lt fuel tank up front? If you have a picture of the tank strapped down in it's position, that would be awesome :-)

These would do wouldn't they?

Details about A4 Marine Grade Stainless Steel Lifting Eye Nuts M6/M8/M10/M12 (DIN 582)

Thread (GW) Internal Diameter Overall Height
M12 30mm 53mm

http://www.ebay.co.uk/itm/A4-Marine-Gra ... 5412420cbb

Sorry James in my late reply

Yup, 2 of them in M12 thread will have the job sorted mate

Paul