Page 1 of 2

Towing a ringo

Posted: 20 Apr 2020, 21:02
by JFISHER
Hi all,
Need some advice.
Got a 4.5m quicksilver frib solid wooden transom, wooden slot together floor and blow up keel. It seems a pretty sturdy boat It’s rated for a 25hp and 8people
Has anyone had any experience towing a ringo with anything like this. I’m running a 25hp 2stroke mariner.
Also what should I fix the ringo to the transom with ! Single tow point or double either side of transom :0 or something totally different.
All help is appreciated.
Thanks again
Jake

Re: Towing a ringo

Posted: 21 Apr 2020, 07:03
by harrison
Hi Jake, you’ll have no trouble pulling a ringo with that set up. We’ve pulled ringo’s, knee and wakeboards with a 3.8m/20hp combo.

Hardware wise I’d be looking to fit a couple of M10 stainless eye bolts high and wide on the transom. Clip on a pulley bridle and job done.

Happy towing.



DCA4ECA5-5F8F-4EA6-8FD9-6FE7DA377A75.jpeg
M10 stainless eye bolts/eye nuts/penny washers

FC7B94F8-163D-4DAF-928A-076329E0B46E.jpeg
Jobe cable bridle with floating quick connector

Re: Towing a ringo

Posted: 21 Apr 2020, 08:07
by Froglet
Where is a good place to buy towable toys? I've had a look around and found pretty slim pickings.

Re: Towing a ringo

Posted: 21 Apr 2020, 08:19
by harrison
Boatworld usually have a good selection of well known brands.

https://boatworld.co.uk/towables

Re: Towing a ringo

Posted: 21 Apr 2020, 10:25
by JFISHER
That’s perfect ! Thanks for your help !

Re: Towing a ringo

Posted: 21 Apr 2020, 19:35
by PeterM
I've always had sportstuff towables... my 2002 one is still going strong now.. which is more than I am 18 years later!!

Re: Towing a ringo

Posted: 23 Apr 2020, 10:41
by eddzoid
Would a 9.8 on a F-RIB 360 have enough pulling power for a 2 or 3 small person Airhead?

Re: Towing a ringo

Posted: 23 Apr 2020, 15:07
by harrison
Pulling 2 or 3 on a ringo with 10hp?

Not a cat in hells chance of getting planing! Sorry.

However, pulling one kiddo on a two person ringo may be just possible on a good day with one up in the boat. Marginal though.

In my experience ringo’s take more power than say a kneeboard or even wakeboard, and the doughnut shape hardest of all to pull out the hole.

Something akin to the Airhead Slash 2 would, in my opinion, be the easiest style to pull, albeit with one aboard. A bonus is they are also steerable, adding to the fun factor.

1BE3F51F-7CFE-46AB-89E7-A054F6E51390.jpeg
Airhead Slash 2

Re: Towing a ringo

Posted: 23 Apr 2020, 16:28
by eddzoid
Out of the 3 grandkids, I think that only one of them would be brave enough! She’s a proper little Bear Grills & she is only 5. Thanks for the advice.

Re: Towing a ringo

Posted: 14 May 2020, 23:49
by JFISHER
Hi again,
Harrison, how long is that towing bridle ? Is it the 8ft one from boat world?

Many thanks again