F-Ribs And Sibs.Com • View topic - Hello from Cheshire

Hello from Cheshire

New to the forum, Please pop in and say “Hi”
Introduce yourself and tell us about what your boating interests are and any other hobbies for that matter.

Hello from Cheshire

Postby dave gregson » 16 Apr 2018, 06:32

Hi Guys,
Purchased my 1st rib / sib yesterday. (not totally sure which category it falls in to)
Got a Honwave 3.5 with a Honda 20hp on the back. It has the alluminum floor.
Had fishing boats for many years but decided to scale down and try to get out more often and enjoy different location.
Tend to fish around Anglesey / Menai Straights but hoping to get a bit firther afield this year?
I would welcome any advice on Launching areas, anchor size and type safety.
Weather forecast looking good later this week so will try to get out????
Thanks in advance
Dave
dave gregson
I'm New
 
Posts: 3
Joined: 11 Apr 2018, 20:06
Location: england
Has thanked: 0 time
Been thanked: 0 time
MMSI Number: 10

Re: Hello from Cheshire

Postby PaulR » 16 Apr 2018, 07:10

Welcome to the forum Dave. Lots of Honwave owners on here that will be able to give you any advice you need. I am new to this myself so not much advice coming from me I am afraid. Like you I am hoping to get my maiden voyage done this week if the weather gods are kind to us. Good luck with your new toy :drive
Regards Paul R
PaulR
Supporting Member
 
Posts: 125
Joined: 05 Nov 2017, 14:30
Location: Scunthorpe
Has thanked: 36 times
Been thanked: 22 times
Boat Make: FRib 360
Outboard: Tohatsu 20hp
MMSI Number: 10

Re: Hello from Cheshire

Postby Paul B » 16 Apr 2018, 08:25

Hi and welcome from another Honwave owner :welcome
Chief Cook and Bottle washer
TRALEE BAY FISH N CHIPS


Honwave T38ie2 Suzuki DF 9.9 (15hp) conversion
Scooter perception kayak
Gosea fishing kayak
User avatar
Paul B
Supporting Member
 
Posts: 1906
Joined: 30 Dec 2014, 18:21
Location: Oban
Has thanked: 155 times
Been thanked: 251 times
Boat Make: Honwave T38ie2
Outboard: Suzuki df9.9 (15hpconversion)
MMSI Number: 0

Re: Hello from Cheshire

Postby Martin » 16 Apr 2018, 13:18

Hi DAVE, welcome again !!
The t35 is indeed a sib, just with aluminium floor sections.
Any of the boats with a soft material hull are sibs (in general) and anything with a solid hull is a rib.
The in between boat is an f-rib. That folds up like a sib but has a solid floor divided into 2,3 or 4 sections depending on the size of the craft.

Floors in the boats differ substantially.
The floor in yours is built up from ally sections, I presume your boat will have an inflatable keel that created a slight v section on the outer hull when inflated and covered with the ally boards.
Some similar designs to yours have wooden or such keels but an air floor mat that pops over the keel.
The other Honwaves “V” high pressure floors are just that. They inflate to .85 bar and create their own deep v keel.

I’d be interested if you would share your local knowledge of launch sites, we’ve often spoke of a north wales trip out but get put off by the over regulation ie: permits, licenses etc.

Enjoy the forum
Martin :cheers
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:
User avatar
Martin
Supporting Member
 
Posts: 3807
Joined: 30 Dec 2014, 13:05
Location: Huddersfield - West Yorksire
Has thanked: 718 times
Been thanked: 352 times
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789

Re: Hello from Cheshire

Postby Cliff » 16 Apr 2018, 17:39

:welcome Welcome to the forum Dave. I'm not too far away, so hope to meet up in the near future. :cheers Cliff
96% of people are basically good, it's the 4% that f*ck up the world
User avatar
Cliff
Active Member
 
Posts: 135
Joined: 31 Dec 2017, 11:47
Location: Sunny Wigan
Has thanked: 58 times
Been thanked: 26 times
Boat Make: Highfield CL310 Rib
Outboard: tohatsu 20hp efi
MMSI Number: 0

Re: Hello from Cheshire

Postby Andy B » 16 Apr 2018, 18:46

:welcome
SOLENT
Waveline 2.3m/3.3hp Mariner
Zodiac 380/Yamaha F8, Mariner 9.9 smoker
User avatar
Andy B
Supporting Member
 
Posts: 1565
Joined: 03 Sep 2015, 17:10
Location: New forest, Hampshire
Has thanked: 64 times
Been thanked: 210 times
Boat Make: Zodiac 380
Outboard: Mariner 9.9hp/Mariner 3.3hp
MMSI Number: 0

Re: Hello from Cheshire

Postby Paul » 16 Apr 2018, 23:23

Hi and :welcome to the forum Dave
The Honwave 3.5 is a good solid sib and I'm sure it'll serve you well :thumbsup
Regarding anchors I'd recommend a 2kg Bruce anchor as I've found them to hold well in pretty much any situation/sea floor composition.
To perform well the anchor needs to be 'set' well ..... on your sib I'd say 3-4 metres of 6mm chain with 30 metres of rope would do the job.
The length of chain and its weight assist the anchor to maintain its angle to work correctly ....... the rope when feed out wants to be at about 30 degrees to the boat to act as a shock absorber when the boat rises and falls on the waves ....... obviously if you're wanting to anchor in deeper water you'll need to attach more rope ;-)
Regarding the rope, be aware that thin rope is difficult to handle with cold wet hands .... personally I don't use rope less than 10mm in diameter :|
Happy boating and any other questions then just :chat
Good to have you aboard
:cheers
I walked through the door marked 'EXIT' and life is now good!
User avatar
Paul
Supporting Member
 
Posts: 2832
Joined: 30 Dec 2014, 21:46
Location: Bracknell, Berkshire
Has thanked: 406 times
Been thanked: 300 times
Boat Make: Mercury Ocean Runner 420
Outboard: Mariner F40ELPT, 3.5 Tohatsu smoker
MMSI Number: 235915479

Re: Hello from Cheshire

Postby Steve » 17 Apr 2018, 07:36

Hi Dave and :welcome

Loads of great advice on here, especially as quite a lot have Honwaves!

Hope you enjoy your first SIB :D

:cheers

Steve
User avatar
Steve
Supporting Member
 
Posts: 221
Joined: 25 Apr 2017, 11:12
Location: Fife
Has thanked: 61 times
Been thanked: 48 times
Boat Make: Honwave T38 IE2
Outboard: Suzuki DF20AS
MMSI Number: 235902190



Return to Introduce Yourself --------- *******NEW MEMBER




Users browsing this forum: No registered users and 0 guests