F-Ribs And Sibs.Com • View topic - Engine leash to transom

Engine leash to transom

From VHF Calling to PFD's (Buoyancy Aids & Lifejackets)
Help, Advice and Discussions....

Engine leash to transom

Postby Paul B » 21 Sep 2017, 11:41

Does anybody ever leash their engine to the transom on the sibs,?

On the return leg of the WW17 trip we encountered some really rough weather,,and I know that Matt Swan had a incident which could,have resulted in him loosing his outboard (or should I say Martins spare) when he got hit by a large wave and one of the engine clamps came loose,

It made me think and I checked my transom yesterday and found quite a large mark in the transom plate from my clamps, see pic, I'm pretty sure if my plate didn't have the lips around the edge i could have been in trouble as well as my engine lifted about 1" up
In future I will be bolting my engine onto the transom before setting out
Attachments
IMG_8697.JPG
Chief Cook and Bottle washer
TRALEE BAY FISH N CHIPS


Honwave T38ie2 Suzuki DF 9.9 (15hp) conversion
Scooter perception kayak
Gosea fishing kayak
User avatar
Paul B
Supporting Member
 
Posts: 1906
Joined: 30 Dec 2014, 18:21
Location: Oban
Has thanked: 155 times
Been thanked: 251 times
Boat Make: Honwave T38ie2
Outboard: Suzuki df9.9 (15hpconversion)
MMSI Number: 0

Re: Engine leash to transom

Postby rogerblack » 21 Sep 2017, 12:14

Hi Paul

My outboard has a retaining eye provided, I believe, for just this purpose, I always use a very short retaining leash attached to it, the other end clipped onto one of the ring eye bolts on the transom.

I also pass a carabiner clip or D shackle through the eyeholes on the two transom bracket clamp screw handles, or now that I have a lock that passes over both handles I sometimes use that, especially if planning to leave the boat unattended since it's a requirement of my (Craftinsure) insurance policy.

I guess if you wanted to be even more secure you could drill through the transom and add a bolt, but would a shake-proof washer and wingnut suffice or would it need a locknut? Since I recall you trailer your boat, then that wouldn't be too much hassle, but for those who fold and carry???

:cheers
cheers
Roger


“Light thinks it travels faster than anything but it is wrong.
No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it.”

― Terry Pratchett, Reaper Man
User avatar
rogerblack
Supporting Member
 
Posts: 608
Joined: 02 Jun 2015, 19:51
Location: Wokingham,Berkshire/Fife, Scotland
Has thanked: 112 times
Been thanked: 129 times
Boat Make: Honwave T32ie airfloor
Outboard: Mercury 15hp 2-st
MMSI Number: 235913495

Re: Engine leash to transom

Postby James » 21 Sep 2017, 15:08

1) That little plastic eye would probably snap under the weight of a dangling engine
2) If my engine fell in the salt water while running, it will be screwed anyway

So, I think I will just let it sink and become a little home for a small fish. As much as I love my trusty old engine, I will never fully rebuild it again as parts are become hard and expensive to obtain.

I will cry though if it did drop off! lol
James

2015 F-Rib 360 married to a 1999 fully rebuilt 15hp 2 Stroke Johnson engine and 22 litre fuel tank.
Mods: Launch wheels, Towing Eyes, 2 Bench Seat Cushions, and 1 Bench Seat Bag
Boat name: Cichlid
James
Supporting Member
 
Posts: 1050
Joined: 01 Aug 2015, 12:25
Location: Copthorne, West Sussex
Has thanked: 37 times
Been thanked: 54 times
Boat Make: F-Rib 360
Outboard: 1999 Johnson 2-Stroke 15 HP
MMSI Number: 235914355

Re: Engine leash to transom

Postby rogerblack » 21 Sep 2017, 15:30

Hi James

The idea is that the tether must be strong but so short that it will prevent the outboard from rising enough to come off the transom in the first place, so will therefore never have to take the full weight of the engine.

As you say, otherwise once 'dunked' the engine would be ruined anyway.

PS None of the eyes I am referring to are plastic, they are metal.

:cheers
cheers
Roger


“Light thinks it travels faster than anything but it is wrong.
No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it.”

― Terry Pratchett, Reaper Man
User avatar
rogerblack
Supporting Member
 
Posts: 608
Joined: 02 Jun 2015, 19:51
Location: Wokingham,Berkshire/Fife, Scotland
Has thanked: 112 times
Been thanked: 129 times
Boat Make: Honwave T32ie airfloor
Outboard: Mercury 15hp 2-st
MMSI Number: 235913495

Re: Engine leash to transom

Postby Paul B » 21 Sep 2017, 17:33

I've already got 2 holes in the transom for bolting the engine on, so in future it will be bolted on
Chief Cook and Bottle washer
TRALEE BAY FISH N CHIPS


Honwave T38ie2 Suzuki DF 9.9 (15hp) conversion
Scooter perception kayak
Gosea fishing kayak
User avatar
Paul B
Supporting Member
 
Posts: 1906
Joined: 30 Dec 2014, 18:21
Location: Oban
Has thanked: 155 times
Been thanked: 251 times
Boat Make: Honwave T38ie2
Outboard: Suzuki df9.9 (15hpconversion)
MMSI Number: 0

Re: Engine leash to transom

Postby Paul » 21 Sep 2017, 18:36

I have one fitted Paul

IMG_1188.JPG
Tether

IMG_1190.JPG
Tether2

Got mine from Pacermarine
Plastic coated stainless cable, stainless steel buckles and bronze crimped.
:hugs
I walked through the door marked 'EXIT' and life is now good!
User avatar
Paul
Supporting Member
 
Posts: 2832
Joined: 30 Dec 2014, 21:46
Location: Bracknell, Berkshire
Has thanked: 406 times
Been thanked: 300 times
Boat Make: Mercury Ocean Runner 420
Outboard: Mariner F40ELPT, 3.5 Tohatsu smoker
MMSI Number: 235915479

Re: Engine leash to transom

Postby Steve » 21 Sep 2017, 20:57

I’m the same as Roger - better safe than sorry. Although I’ve yet to get a proper outboard lock. So the transom looks like this:

BFBCC9C4-92B4-487F-8C47-2B0F904AA8A9.jpeg
User avatar
Steve
Supporting Member
 
Posts: 221
Joined: 25 Apr 2017, 11:12
Location: Fife
Has thanked: 61 times
Been thanked: 48 times
Boat Make: Honwave T38 IE2
Outboard: Suzuki DF20AS
MMSI Number: 235902190

Re: Engine leash to transom

Postby James » 21 Sep 2017, 21:15

Paul wrote:I have one fitted Paul

IMG_1188.JPG

Got mine from Pacermarine
Plastic coated stainless cable, stainless steel buckles and bronze crimped.
:hugs


Good image, thankyou. I will look at getting one.
James

2015 F-Rib 360 married to a 1999 fully rebuilt 15hp 2 Stroke Johnson engine and 22 litre fuel tank.
Mods: Launch wheels, Towing Eyes, 2 Bench Seat Cushions, and 1 Bench Seat Bag
Boat name: Cichlid
James
Supporting Member
 
Posts: 1050
Joined: 01 Aug 2015, 12:25
Location: Copthorne, West Sussex
Has thanked: 37 times
Been thanked: 54 times
Boat Make: F-Rib 360
Outboard: 1999 Johnson 2-Stroke 15 HP
MMSI Number: 235914355

Re: Engine leash to transom

Postby 9-R » 22 Sep 2017, 12:40

I saw too many videos of people losing their engines that way that I made sure ours was tethered. My Merc had a 'D' ring for such purposes. Had eye-bolts for my mounting plate which I latched it to. Never had it come close but was happy that it was there.
Wrote a note said, 'back in a minute'. Bought a boat and I sailed off in it.
User avatar
9-R
Super Poster
 
Posts: 763
Joined: 12 Feb 2016, 13:56
Location: The Republic of Texas
Has thanked: 115 times
Been thanked: 91 times
Boat Make: Boston Whaler Montauk 170
Outboard: Mercury 90hp EFI
MMSI Number: 0

Re: Engine leash to transom

Postby Martin » 22 Sep 2017, 19:20

STEVE..
What’s that you’ve got strapped to the outboard handle pls?
Is it a Hrs/Rev/Speed tach?

Martin :cheers
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:
User avatar
Martin
Supporting Member
 
Posts: 3807
Joined: 30 Dec 2014, 13:05
Location: Huddersfield - West Yorksire
Has thanked: 718 times
Been thanked: 352 times
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789

Next


Return to Safety Devices, Equipment & Instruction




Users browsing this forum: No registered users and 0 guests