F-Ribs And Sibs.Com • View topic - Bravo BTP Digital electric pump.

Bravo BTP Digital electric pump.

Soft Floor Inflatable Boats

Re: Bravo BTP Digital electric pump.

Postby rogerblack » Thu Jul 20, 2017 10:14 pm

Picture of a Halkey Roberts adaptor with sketch drawing showing adjustable screw here:

viewtopic.php?f=30&t=1827#p19506

:cheers
cheers
Roger


I feel tremendously bucked-up,
which is several letters of the alphabet away from how I felt a few days ago.
User avatar
rogerblack
Supporting Member
 
Posts: 516
Joined: Tue Jun 02, 2015 8:51 pm
Location: Wokingham,Berkshire/Fife, Scotland
Has thanked: 104 times
Been thanked: 93 times
Boat Make: Honwave T32ie airfloor
Outboard: Mercury 15hp 2-st
MMSI Number: 235913495

Re: Bravo BTP Digital electric pump.

Postby The Hobbit » Sun Jul 23, 2017 1:38 pm

Mine is about 3 years old and hardly used. I took it apart this morning and its as clean as a whistle in the chamber and no damage to the rubber gate and I could see the magnet inside. THE INTERESTING BIT, maybe for some, the same happens without the hose even connected. At various pressures including the lowest, it starts on second stage every time. I even read the instructions too.
I'm not really a Hobbit, just look like one. Real name is "Andy".
User avatar
The Hobbit
Active Member
 
Posts: 60
Joined: Mon Jul 10, 2017 4:03 pm
Location: Farnborough Hampshire
Has thanked: 32 times
Been thanked: 5 times
Boat Make: Honwave T38 IE2
Outboard: Yamaha 2 stroke 15D
MMSI Number: 0

Re: Bravo BTP Digital electric pump.

Postby PhilHonwave » Mon Jul 24, 2017 12:39 pm

Hi,

I have the same,

1st noise is a normal fan, 2nd noise is a little compressor that kicks in once the fan can't cope with the 0.8 bar...

Hope this helps

Regards

Phil Douglas
PhilHonwave
Newish Member, But I Like It Here
 
Posts: 22
Joined: Fri Jul 07, 2017 10:21 am
Location: Alton
Has thanked: 10 times
Been thanked: 2 times
Boat Make: Quicksilver2.7/Honwave3.8
Outboard: 2.5 hp mariner (2 stroke)
MMSI Number: 10

Re: Bravo BTP Digital electric pump.

Postby Speedo » Mon Jul 31, 2017 10:02 am

I've just got one of these pumps too. Not sure why it has the two types of pumping as it jumps to the second stage (louder) pumping after only a few seconds?? I thought it was supposed to turbo pump the chambers quickly then flick over to the noisy pump when close to full pressure to top up?

Wish I'd bought the cheaper single pump version now as that's all I seem to get!!
Speedo
Newish Member, But I Like It Here
 
Posts: 16
Joined: Tue Jul 25, 2017 5:53 am
Location: Kent
Has thanked: 0 time
Been thanked: 0 time
Boat Make: Honwave T32
Outboard: Johnson 5hp 2 stroke
MMSI Number: 10

Re: Bravo BTP Digital electric pump.

Postby rogerblack » Mon Jul 31, 2017 10:35 am

Hi, Speedo

Did you see Martin's earlier post in this thread about correctly adjusting the screw on the Halkey-Roberts adaptor?

Worth checking if that's the problem, causing early resistance due to the valve stem not being pushed in.

:cheers
cheers
Roger


I feel tremendously bucked-up,
which is several letters of the alphabet away from how I felt a few days ago.
User avatar
rogerblack
Supporting Member
 
Posts: 516
Joined: Tue Jun 02, 2015 8:51 pm
Location: Wokingham,Berkshire/Fife, Scotland
Has thanked: 104 times
Been thanked: 93 times
Boat Make: Honwave T32ie airfloor
Outboard: Mercury 15hp 2-st
MMSI Number: 235913495

Re: Bravo BTP Digital electric pump.

Postby Speedo » Mon Jul 31, 2017 11:30 am

Hi, I didn't see that, but I'll check that now.

I hoped it might be something like that.

Thanks
Speedo
Newish Member, But I Like It Here
 
Posts: 16
Joined: Tue Jul 25, 2017 5:53 am
Location: Kent
Has thanked: 0 time
Been thanked: 0 time
Boat Make: Honwave T32
Outboard: Johnson 5hp 2 stroke
MMSI Number: 10

Previous


Return to SIB (Inflatable Boats)




Users browsing this forum: No registered users and 1 guest