F-Ribs And Sibs.Com • View topic - How fast before your fishfinder stops working?

How fast before your fishfinder stops working?

Chart Plotters, Fish Finders, GPS, VHF, Lighting & anything powered by 'elec-trickery'

How fast before your fishfinder stops working?

Postby Jimthehook » 12 Jan 2018, 17:34

As the title says "How fast before your fishfinder stops working?" I can get to 6 knotts and it packs in, I've tried to place the transducer in different spots on the transom, high, low, left and right of the motor but still the same result. I know on boats they can speed along and it still works, so is this just a rib/sib thing due to the amount of turbulence they create? its been bugging me for a while now so next time out im going to put the transducer on a pole and try it at different spots all round the sib as we steam along, the front is out of the water most of the time so i guess the left or right side but still a pain to fashion any sort of mount due to lack of places to fix too :Confused

Also being the t32ie with the trim tab thingies its making it very hard to get a good setup!. :help

Jim.
User avatar
Jimthehook
Active Member
 
Posts: 85
Joined: 23 Oct 2017, 20:04
Location: Devon
Has thanked: 80 times
Been thanked: 17 times
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10

Re: How fast before your fishfinder stops working?

Postby Andy B » 12 Jan 2018, 19:01

Jimthehook wrote: so is this just a sib thing due to the amount of turbulence they create? its been bugging me Jim.

Yep.
Although it's the amount if air in the water that's the problem.
The solution it to find a spot with clean water flow.
Have you tried running the transducer a bit lower?
Should be ok at Sib speeds.
SOLENT
Waveline 2.3m/3.3hp Mariner
Zodiac 380/Yamaha F8, Mariner 9.9 smoker
User avatar
Andy B
Supporting Member
 
Posts: 1565
Joined: 03 Sep 2015, 17:10
Location: New forest, Hampshire
Has thanked: 64 times
Been thanked: 210 times
Boat Make: Zodiac 380
Outboard: Mariner 9.9hp/Mariner 3.3hp
MMSI Number: 0

Re: How fast before your fishfinder stops working?

Postby Jimthehook » 12 Jan 2018, 20:22

Yea tried it at a few depths, thought it would be low enough to be out the way of the air bubbles but alas still no joy, its fine up to 6 notts then loses the bottom, guess I will just have to love with it!! I can see a bigger rib with more mounting options on the horizon soon though! :D
User avatar
Jimthehook
Active Member
 
Posts: 85
Joined: 23 Oct 2017, 20:04
Location: Devon
Has thanked: 80 times
Been thanked: 17 times
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10

Re: How fast before your fishfinder stops working?

Postby Paul » 12 Jan 2018, 22:07

As Andy has said it's difficult on a sib due to water movement around the hull, bubbles and boat rising/falling during operation.
Ones that work at speed are invariably the 'through the hull' type which ain't gonna happen on your sib unfortunately.
I had the same problem with a trim tab sib so tried side mounting with little success :|

Untitled.jpg
Side mount transducer
I walked through the door marked 'EXIT' and life is now good!
User avatar
Paul
Supporting Member
 
Posts: 2832
Joined: 30 Dec 2014, 21:46
Location: Bracknell, Berkshire
Has thanked: 406 times
Been thanked: 300 times
Boat Make: Mercury Ocean Runner 420
Outboard: Mariner F40ELPT, 3.5 Tohatsu smoker
MMSI Number: 235915479

Re: How fast before your fishfinder stops working?

Postby Jimthehook » 13 Jan 2018, 10:13

Thanks Paul, yea I think im just gonna have to live with it until I can get a hull it will work through..... :thumbsup
User avatar
Jimthehook
Active Member
 
Posts: 85
Joined: 23 Oct 2017, 20:04
Location: Devon
Has thanked: 80 times
Been thanked: 17 times
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10

Re: How fast before your fishfinder stops working?

Postby Stray » 26 Jan 2018, 11:38

I had all sorts of problems getting the transducer to work at speed. It's a Lowrance Totalscan and it's quite big.

Image

the best position I've come up with is this, is actually under the boat.

Image

It works well at speed, even in sidescan, but is prone to coming loose, more work on the design is needed before spring.
Stray
Veteran Member
 
Posts: 574
Joined: 10 Jun 2015, 10:52
Location: Oop North.
Has thanked: 13 times
Been thanked: 61 times
MMSI Number: 0

Re: How fast before your fishfinder stops working?

Postby Jimthehook » 26 Jan 2018, 13:45

Thanks Stray, I had not considered putting it under the boat like that, I will give it a go next time out and see!. :D
User avatar
Jimthehook
Active Member
 
Posts: 85
Joined: 23 Oct 2017, 20:04
Location: Devon
Has thanked: 80 times
Been thanked: 17 times
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10



Return to Electrical




Users browsing this forum: No registered users and 1 guest