Dreaming of T38 Hulls.

User avatar
Supporting Member
Posts: 126
Joined: 23 May 2018, 15:30
Boat Make: Zodiac c310
Outboard: Mariner 5hp 2 stroke | Mariner 9.9hp Four Stroke
MMSI Number: 235916094
Location: Southampton
Has thanked: 11 times
Been thanked: 24 times

Re: Dreaming of T38 Hulls.

Post by ChrisParish » 13 Jul 2018, 16:44

The pic I posted was deliberately shot to minimise the raise of the bow so that you could see how straight it is.

Here is a quick screenshot from the time lapse where you can get a better feel for the size of the V
Again, because if the angle it doesn’t look like much but I assure you it is really! Look at the curve in the keel strip. I’ll take a pic next time so am out.

P.s - I doubt that I could stand on the upturned boat, but if you’ve met me you will know why! :D
Not a complete idiot - some parts are missing.

User avatar
Supporting Member
Posts: 4022
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorksire
Has thanked: 816 times
Been thanked: 370 times

Re: Dreaming of T38 Hulls.

Post by Martin » 13 Jul 2018, 22:34

They've changed the hull design without a doubt, My old T38ie had a much more pronounced V at the bow.
Still, I've seen a few of these new T38's and they seem to ;erform just as well as the older version. :thumbsup
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

Post Reply

Return to “Honwave”