Dreaming of T38 Hulls.

User avatar
ChrisParish
Supporting Member
Posts: 247
Joined: 23 May 2018, 15:30
Boat Make: Zodiac c310
Outboard: Mariner 5hp 2 stroke | Mariner 9.9hp Four Stroke
MMSI Number: 235916094
Location: Southampton
Has thanked: 12 times
Been thanked: 50 times

Re: Dreaming of T38 Hulls.

Post by ChrisParish » 13 Jul 2018, 16:44

The pic I posted was deliberately shot to minimise the raise of the bow so that you could see how straight it is.

Here is a quick screenshot from the time lapse where you can get a better feel for the size of the V
C606641E-11EE-46EB-A5E0-FCBF5227930F.jpeg
Again, because if the angle it doesn’t look like much but I assure you it is really! Look at the curve in the keel strip. I’ll take a pic next time so am out.

P.s - I doubt that I could stand on the upturned boat, but if you’ve met me you will know why! :D
Not a complete idiot - some parts are missing.

User avatar
Martin
Supporting Member
Posts: 4173
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorkshire
Has thanked: 859 times
Been thanked: 396 times
Contact:

Re: Dreaming of T38 Hulls.

Post by Martin » 13 Jul 2018, 22:34

They've changed the hull design without a doubt, My old T38ie had a much more pronounced V at the bow.
Still, I've seen a few of these new T38's and they seem to perform just as well as the older version. :thumbsup
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

User avatar
ChrisParish
Supporting Member
Posts: 247
Joined: 23 May 2018, 15:30
Boat Make: Zodiac c310
Outboard: Mariner 5hp 2 stroke | Mariner 9.9hp Four Stroke
MMSI Number: 235916094
Location: Southampton
Has thanked: 12 times
Been thanked: 50 times

Re: Dreaming of T38 Hulls.

Post by ChrisParish » 17 Jul 2018, 14:35

Here are some more pics of the bow. Thoughts?
Attachments
62C822CB-75E6-478B-A2BF-C63452C3DF0D.jpeg
9F18B08A-BE36-4816-BF87-FA9D922F104B.jpeg
Not a complete idiot - some parts are missing.

User avatar
ChrisParish
Supporting Member
Posts: 247
Joined: 23 May 2018, 15:30
Boat Make: Zodiac c310
Outboard: Mariner 5hp 2 stroke | Mariner 9.9hp Four Stroke
MMSI Number: 235916094
Location: Southampton
Has thanked: 12 times
Been thanked: 50 times

Re: Dreaming of T38 Hulls.

Post by ChrisParish » 17 Jul 2018, 22:57

I have been looking at all the pictures I can find online and the V appears to be the same as all the others I have seen. The only defect I can find is that the V is slightly asymmetrical although the keel is dead straight.
Not a complete idiot - some parts are missing.

Post Reply

Return to “Honwave”