DIY bow spray canopy

Sib,Frib & Rib modifications.
Share your mods with the forum
User avatar
The Hobbit
Supporting Member
Posts: 512
Joined: 10 Jul 2017, 15:03
Boat Make: Honwave T38 IE2
Outboard: 1985 Yamaha 2 stroke 15 D
MMSI Number: 235904468
Location: Farnborough Hampshire
Has thanked: 77 times
Been thanked: 99 times

Re: DIY bow spray canopy

Post by The Hobbit » 15 Sep 2018, 11:37

Hi David and welcome to the forum.
I'm not really a Hobbit, just look like one. Real name is "Andy".

User avatar
Martin
Supporting Member
Posts: 4219
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorkshire
Has thanked: 872 times
Been thanked: 402 times
Contact:

Re: DIY bow spray canopy

Post by Martin » 16 Sep 2018, 06:34

DavidA wrote:
15 Sep 2018, 08:48
Hi All. New here, and to SIBing!
Would love to add one of these sparay canopies to my Honwave T27 but would like advice as to how to locate the ends of the tent poles to the top of my tubes . Location I guess would be just forward of the seat.
Any ideas would be welcome.
Hi David,
In the past we've seen everything from simple blocks of wood for feet, to plumbing end stops sewn in to the (safety line) grab rope on the top of the tubes.
I personally use railblaza bimini mounts.

Great to have you aboard buddy, If you coyuld possibly do a `~~~~"Hello - I'm new" post in the introduce yourself section please, that would be great...
It not only allows you to say "Hello" to all the guys, It also gets seen by most of the members on here and they can say hello to you too....

Enjoy the forum
Martin :cheers
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

DavidA
I'm New
Posts: 4
Joined: 12 Sep 2018, 09:33
Boat Make: Honwave T27
Outboard: Yamaha F4 four stroke
MMSI Number: 10
Has thanked: 0
Been thanked: 0

Re: DIY bow spray canopy

Post by DavidA » 16 Sep 2018, 10:01

Hi Martin

Thanks for the quick reply. Do you have a link to these mounts. I'm assuming they have to be glued on to the sponson. Have ordered 7mm tent pole sections so assume these would fit.

David

Post Reply

Return to “DIY & Modifications”