Honda Transom Wheels bit of a joke! Roll out the Rollers!

Jakeyboy
Advanced Member
Posts: 241
Joined: 10 Sep 2017, 10:06
MMSI Number: 10
Has thanked: 2 times
Been thanked: 18 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Jakeyboy » 16 Nov 2017, 18:13

So you guys have got me worried now , Mine were bought as genuine honda marine wheels from a dealer! But look the same thickness as Paul's,how do i tell? There is a bit of elongation on pin holes but not crazy

chris moody
Supporting Member
Posts: 1482
Joined: 24 Mar 2015, 12:19
Boat Make: Honwave T32IE
Outboard: Tohatsu 9.8
MMSI Number: 235900806
Location: Davetry & Porchester
Has thanked: 42 times
Been thanked: 173 times
Contact:

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by chris moody » 16 Nov 2017, 19:50

Mine are genuine Honda as well, but I have no idea if they are heavy duty or standard.
Chris Moody

Tiny Tigga - Honwave T32IE with launch wheels Honda 2hp 4 stroke air cooled & Tohatsu 9.8 2 stroke
Tigga 2 - Ribcraft 4.8 Honda BF50
http://twitter.com/aslmarine

User avatar
Jimthehook
Active Member
Posts: 85
Joined: 23 Oct 2017, 20:04
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10
Location: Devon
Has thanked: 80 times
Been thanked: 17 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Jimthehook » 17 Nov 2017, 10:58

Thank you everyone so much for the replies, and yes they were sold to me as genuine honda wheels, Just got off the phone to them and they tell me that 'Trem' make them for Honda. hmmmm anyway they are being returned in the morning for a full refund and we have ordered the heavy duty ones that Paul posted on page 3 of this thread. Lets hope they do the Job and get us back on the road!!.

User avatar
Martin
Supporting Member
Posts: 4022
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorksire
Has thanked: 816 times
Been thanked: 370 times
Contact:

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Martin » 17 Nov 2017, 11:20

That’s great news Jim, at least they’ve fully refunded you :IANW
If the hobbit replies to your “on the road” comment, I’m gonna sink him during wwa 2018
:waterski :shoot :lol:
These users thanked the author Martin for the post:
Jimthehook (17 Nov 2017, 11:32)
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

User avatar
Jimthehook
Active Member
Posts: 85
Joined: 23 Oct 2017, 20:04
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10
Location: Devon
Has thanked: 80 times
Been thanked: 17 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Jimthehook » 17 Nov 2017, 11:33

Martin wrote:That’s great news Jim, at least they’ve fully refunded you :IANW
If the hobbit replies to your “on the road” comment, I’m gonna sink him during wwa 2018
:waterski :shoot :lol:
Shhh that comment was bait!!! :lol:
These users thanked the author Jimthehook for the post:
Martin (17 Nov 2017, 12:02)

acidcloud
Active Member
Posts: 102
Joined: 07 Jul 2017, 22:11
Boat Make: Honda Honwave T38 IE
Outboard: Suzuki DF20AS 20hp
MMSI Number: 10
Location: Brighton
Has thanked: 2 times
Been thanked: 14 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by acidcloud » 17 Nov 2017, 14:23

Kaman, What were the size of the large wheels you put on the Honwave transom wheels?

Was it a straight swap or did you have to make a mod, if so what?

definitely want wider wheels on my Honwave T3.8 transom wheels cos of sot sand/shingle beeach I launch off.

User avatar
kaman
Supporting Member
Posts: 833
Joined: 05 Aug 2015, 23:01
Boat Make: Honwave 3.5a Honwave t3.8
Outboard: Tohatsu 20hp
Suzuki 2.5hp
Suzuki 2.2hp
MMSI Number: 235114675
Location: South West Scotland
Has thanked: 24 times
Been thanked: 125 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by kaman » 17 Nov 2017, 17:04

Hi Acidcloud.
I'd need to dig them out of the shed.
I took them directly off my dinghy launch trailer see link :


https://rover.ebay.com/rover/0/0/0?mpre ... 2498975683


I had to cut a piece off of the plastic hub on the outside edge so as to accomodate the split pin but hub diameter was spot on.

Most wheels / tyres give the hub and tyre dimensions.
If I get a chance I'll have a look over the weekend :thumbsup

User avatar
kaman
Supporting Member
Posts: 833
Joined: 05 Aug 2015, 23:01
Boat Make: Honwave 3.5a Honwave t3.8
Outboard: Tohatsu 20hp
Suzuki 2.5hp
Suzuki 2.2hp
MMSI Number: 235114675
Location: South West Scotland
Has thanked: 24 times
Been thanked: 125 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by kaman » 17 Nov 2017, 17:11

Hi again Acidcloud.
I looked at pic I posted.
Looks like dimensions are:
4.10 / 3.50 /6

Screenshot_2017-11-17-17-06-45.png
I'd imagine that means 4.10 inches wide
3.50 inches profile
6 inch wheel.
Think hub diameter is 1 inch :drive

acidcloud
Active Member
Posts: 102
Joined: 07 Jul 2017, 22:11
Boat Make: Honda Honwave T38 IE
Outboard: Suzuki DF20AS 20hp
MMSI Number: 10
Location: Brighton
Has thanked: 2 times
Been thanked: 14 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by acidcloud » 17 Nov 2017, 17:38

Ok I guess that would make it a 14 inch diameter wheel.

My current wheels are 250cm in diameter and 85mm wide tire on 20mm wide axle and 75mm long to locking pin.
so 10 inch diameter, 3.5 inch wide tyre, 3 inch long axle.

Measuring stainless steel transom posts 14 inch diameter wheels will be just touching the bend of my Honda original heavy duty transom posts.
How much clearance do you have , did you use an inside spacer / washer to get clearance?

Thanks very helpful

User avatar
kaman
Supporting Member
Posts: 833
Joined: 05 Aug 2015, 23:01
Boat Make: Honwave 3.5a Honwave t3.8
Outboard: Tohatsu 20hp
Suzuki 2.5hp
Suzuki 2.2hp
MMSI Number: 235114675
Location: South West Scotland
Has thanked: 24 times
Been thanked: 125 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by kaman » 17 Nov 2017, 19:16

Hi A.C
I don't have a pic of the larger wheels on the T3.8.
I have tried them and there is bags of clearance from the bend in the leg and from the bottom of the trim tabs.
I did need a small washer on the inside to stop the tyre wall scrubbing on the leg.
I'll be taking both sets of wheels on my jollies .
Depending on my launch / retrieval sites I'll use accordingly.
The R clips make changing the wheels a few second job.
Here's a pic of the standard wheels on the sib.
Attachments
Screenshot_2017-11-17-19-07-37.png

Post Reply

Return to “Honwave”