Honda Transom Wheels bit of a joke! Roll out the Rollers!

User avatar
Jimthehook
Active Member
Posts: 85
Joined: 23 Oct 2017, 20:04
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10
Location: Devon
Has thanked: 80 times
Been thanked: 17 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Jimthehook » 15 Nov 2017, 10:14


User avatar
kaman
Supporting Member
Posts: 833
Joined: 05 Aug 2015, 23:01
Boat Make: Honwave 3.5a Honwave t3.8
Outboard: Tohatsu 20hp
Suzuki 2.5hp
Suzuki 2.2hp
MMSI Number: 235114675
Location: South West Scotland
Has thanked: 24 times
Been thanked: 125 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by kaman » 15 Nov 2017, 14:56

Jeezo Jim they look awful.
Whilst there is a little play (from side to side) in my wheels it doesn't disrupt wheeling the sib along - actally helps rolling over uneven surfaces.
I can see the thickness of the metal in the mounts is thinner and looks like a poor grade of metal.
I sincerely hope the dealer puts things right :thumbsup
These users thanked the author kaman for the post:
Jimthehook (15 Nov 2017, 16:03)

User avatar
Jimthehook
Active Member
Posts: 85
Joined: 23 Oct 2017, 20:04
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10
Location: Devon
Has thanked: 80 times
Been thanked: 17 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Jimthehook » 15 Nov 2017, 16:05

Thanks Karman, emailed them this video earlier and no reply, maybe they sent it to the honda rep and awaiting a reply, either way they will be getting a visit from me in the next 2 days with a greased wheel leg ready to insert!!

User avatar
Jimthehook
Active Member
Posts: 85
Joined: 23 Oct 2017, 20:04
Boat Make: Honwave T32IE
Outboard: Mercury 9.9fs
MMSI Number: 10
Location: Devon
Has thanked: 80 times
Been thanked: 17 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Jimthehook » 15 Nov 2017, 16:18

Update.....

They have just offered to replace the 2 brackets or give me a refund, all good news :)

User avatar
kaman
Supporting Member
Posts: 833
Joined: 05 Aug 2015, 23:01
Boat Make: Honwave 3.5a Honwave t3.8
Outboard: Tohatsu 20hp
Suzuki 2.5hp
Suzuki 2.2hp
MMSI Number: 235114675
Location: South West Scotland
Has thanked: 24 times
Been thanked: 125 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by kaman » 15 Nov 2017, 16:21

The Hobbit wrote:
kaman wrote:They work much better on soft beaches but are harder to affix when coming ashore due to them being more buoyant tha their smaller counterparts.
Ha I was wrestling with mine for ages trying to get them back on in the drink, everyone had almost gone home by the time I got them on, floating all other the place they were!!!! There must be a knack to it!! :lol: :drive :LMT

Yup Hobbit they are a nightmare indeed :thud
I've found that dropping anchor a few hundred yards from shore or in a resonably sheltered spot not too far from port is the best approach.
Once the anchor sets the sib will sit bow into the oncoming seas.
That affords you a little shelter at the stern to connect the wheels.
Anchor up and head for shore in shallow water drive - cut the engine and pull the sib from the bow onto shore.
I've rigged a small 12v pump to dispel the odd splashes of water over the transom.
Each application is different but in the main I launch and retrieve from a mixture of sand / shingle beaches and a few sand / shingle harbours.
The protection afforded by a harbour wall can greatly assist retrieval. :thumbsup
These users thanked the author kaman for the post (total 2):
The Hobbit (15 Nov 2017, 18:44) • Jimthehook (17 Nov 2017, 10:56)

User avatar
The Hobbit
Supporting Member
Posts: 336
Joined: 10 Jul 2017, 15:03
Boat Make: Honwave T38 IE2
Outboard: 1985 Yamaha 2 stroke 15 D
MMSI Number: 235904468
Location: Farnborough Hampshire
Has thanked: 63 times
Been thanked: 61 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by The Hobbit » 15 Nov 2017, 18:46

Jimthehook wrote:Update.....

They have just offered to replace the 2 brackets or give me a refund, all good news :)
Good news indeed Jim :Boxsmile :thumbsup :drive
I'm not really a Hobbit, just look like one. Real name is "Andy".

User avatar
kaman
Supporting Member
Posts: 833
Joined: 05 Aug 2015, 23:01
Boat Make: Honwave 3.5a Honwave t3.8
Outboard: Tohatsu 20hp
Suzuki 2.5hp
Suzuki 2.2hp
MMSI Number: 235114675
Location: South West Scotland
Has thanked: 24 times
Been thanked: 125 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by kaman » 15 Nov 2017, 19:49

Jimthehook wrote:Update.....

They have just offered to replace the 2 brackets or give me a refund, all good news :)

Good stuff Jim.
Pleased their getting you sorted out
I'd be hard pushed to see how they could turn a blind eye to the video clip you sent them :o :Boxsmile

User avatar
Martin
Supporting Member
Posts: 4022
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorksire
Has thanked: 816 times
Been thanked: 370 times
Contact:

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Martin » 16 Nov 2017, 05:14

Jeeeeez, looking at that vid you’re right, they really are cheap and thin compared to the ones I fitted.
I’d be tempted to take the money and run !
These users thanked the author Martin for the post:
Jimthehook (17 Nov 2017, 10:56)
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

User avatar
Paul B
Supporting Member
Posts: 1972
Joined: 30 Dec 2014, 18:21
Boat Make: Honwave T38ie2
Outboard: Suzuki df9.9 (15hpconversion)
Location: Oban
Has thanked: 160 times
Been thanked: 258 times

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Paul B » 16 Nov 2017, 10:22

Not good at all, but mine where so bad I had no choice but to replace them as the sib tipped onto its side just rolling it in a straight line, :thud , get your money back and buy some decent ones, :thumbsup even the base plate which bolts to the transom was bent
Attachments
2BA58F9D-5734-40E7-BB47-480041A24EF4.jpeg
These users thanked the author Paul B for the post:
Jimthehook (17 Nov 2017, 10:55)
Chief Cook and Bottle washer
TRALEE BAY FISH N CHIPS


Honwave T38ie2 Suzuki DF 9.9 (15hp) conversion
Scooter perception kayak
Gosea fishing kayak

User avatar
Martin
Supporting Member
Posts: 4022
Joined: 30 Dec 2014, 13:05
Boat Make: F-Rib 3.75 - Special
Outboard: Suzuki Smoker DT9 (1978) , Suzuki DF20 efi
MMSI Number: 123456789
Location: Huddersfield - West Yorksire
Has thanked: 816 times
Been thanked: 370 times
Contact:

Re: Honda Transom Wheels bit of a joke! Roll out the Rollers

Post by Martin » 16 Nov 2017, 15:55

Jim....
I've just watched your video on my desktop... Omg, they are abysmal :o
Who supplied those, and were they supplied as genuine Honda Marine?

No way in this world would Honda marine produce something as cheap and shabby as that, Attached with machine screws too .... Absolutely shocking !
As i said earlier, grab your money and run for the hills, That's the worse set I've seen to date :thud
These users thanked the author Martin for the post:
Jimthehook (17 Nov 2017, 10:55)
F-RibsAndSibs.Com.... :whistle
Because it's a big old WWworld out there :mrgreen:

Post Reply

Return to “Honwave”